Sun Machinery is the place for contractors to buy and sell rigs and related equipment. Our database contains thousands of used drilling rigs for sale, which are presented and continuously updated online.
OILFIELD DRILLING RIGS / WORKOVER RIGS / SUPPORT EQUIPMENT
SUN MACHINERY CORP.
P.O. Box
482, Oceanside, New York 11572 USA
Telephone: (516) 536 7375 Fax (516) 536
7317
Drilling / Production Superintendent,
Below is a list of some of the used & new
drilling rigs, support equipment and Joy WB14 booster for production and
drilling. Additional information is available upon request and you may
view many of the rigs on our website.
Sun looks forward to hearing from you and be
advised that we are continuously interested in any drilling or workover
equipment that you have for sale.
JOY BOOSTER WB14 (Ref#2188N)Rebuilt (test hours only) rebuilt by internationally
known rebuilder
Model JR-500
Joy WB14 frame and cylinders rebuilt to
specifications, Cummins KTA 575 hp engine rebuilt to specifications.
Input: 1800 cfm/350 psi
Output: 1800 cfm/1500 psi
Cylinder sizes:
§(2) on first stage: 3-3/4” x 7”
and 3-3/4” x 7”
§Second stage: 3-3/4” x
7”
§Third stage: 3-3/4” x
7”
New skid, coolers, pressure scrubbers and all parts
in booster. New R.J. Link complete gear reduction transmission 3:1 ratio, anti
engine rotation, with pump and clutch assembly, gear reduction. Ambient
working range 130 degrees Fahrenheit. Completely rebuilt with new and
rebuilt parts. Reworked and fabricated to new condition.
Dimensions/weight 28’L x 8’W x 7’H, 36,000#. 100 hour test run performance
data available.
Located at the rebuilder's factory in Pennsylvania,
USA. Any modifications can be performed on the booster and additional test runs
can be done.
Price:
$150,000 - or best offer
This booster was engineered, rebuilt and assembled
for an international user who never took delivery. It was remanufactured
by a major US manufacturer/rebuilder that specializes in compressors and
boosters.
Air Hoists: (1) air motor 10,000#, (1) Ingersoll Rand
10,000#
Tongs
Casing Stabbing Board
Pine Spinners: Gray Mark 10
Derrick accessories: ladder, standpipe, tong counter weights,
racking board, Geronimo line, lights in derrick and rig floor
Lifting and Drilling Equipment:
Drawworks skid 27’ x 9.25”, power skid 27’ x 10’, Model OIME E-3000
3000hp, Elmagco 7838 Electric aux brake, driller’s console, Crown-o-Matic, (3)
EMD D79 electric traction motors, Foster catheads
1-1/2” drilling line, drilling line spool
Ideco 750 ton travelling block
BJ Dyna-Plex 750 ton hook
Continental Emsco LB650 650 ton swivel
Ideco LR-375 rotary table, 37-1/2” opening, master bushing, kelly
bushing
650 ton x 144” elevator links
International Tool Company kelly spinner
High Pressure System
Mud pump:
Continental Emsco FB-1600, 1600 hp triplex, (2) GE 753 DC electric
motors
Continental Emsco FB-1600, 1600 hp triplex, (2) EMD D79 electric
motors
Gardner Denver PZ-10, 1350 hp, power GE 752
Charger Pump: (3) 6 x 5 x 11 w/75 hp electric motors
Standpipe manifold
Low Pressure System
Shale tank: 570 bbl, 40’ x 12’
Intermediate tank: 570 bbl, 40’ x 12’
Suction tank: 570 bbl, 40’ x 12’
Trip tank: 130 bbl
Premix pit: 100 bbl
Solids Control Equipment:
(2) Derrick L148 flo-line linear motion
(2) Mission Magnum 5 x 6 75hp centrifugals
Desander: Totco (2) 12” cones
Desilter: Total (12) 4” cones
Degasser: Swaco vacuum
Pit Stirrers: (5) 10 hp stirrers
Mud Mixing Pumps: (3) Mission Magnum 5 x 6 100hp
centrifugals
Water tanks: (1) 500 bbl 43’ l x 10’ w – rectangular. (1)
500 bbl 35’L x 10.5” dia – cylindrical.
20,000 gal diesel tank, 43’ x 10’
Mud/gas separator: 26’ x 8’ x 72” diameter
Power System
(3) Cat D399TA diesel engines
(3) KATO 1000 kw generators
(1) Gardner Denver 30 hp air compressor
(1) Sullivan Palantek 50 dg air compressor
(1) Quincey 4-cylinder air compressor
Power Systems Houses
(1) Ross Hill 1600 SCR house ()48’ x 11.5’)
(3) Genertor House (43’ x 12’)
(1) Air compressor house (43’ x 10’)
Doghouses:
45’L x 10’W, Matheny Explorer 1600 Surveyros
Off driller side house: 45’L x 10’W
Junk baskets, mud house, rig manager’s house, parts houses, change
house, power washer, 3x2x13 centrifugal pump, 30 hp electric motor
Well Control Equipment
BOP Stack: 11” rotation head, (1) Hydril GK 13-5/8 x 10,000#
annular preventer, Cameron Type U 13-5/8 x 10,000# double ram preventer, 13-5/8
x 10,000# mud cross, Cameron Type U 13-5/8” x 10,000# single ram preventer, (2)
2” x 10,000# gate valves, (1) 2” x 10,000# chick valve, (1) 4” x 10,000# gate
vale, (1) 4” x 10,000# HCR valve
(1) closing unit, 9 station, 300 gallon triplex, air actuated
charging pumps
(1) remote closing unit, floor mounted in drillers dog
house
Choke Manifold: (1) 2” x 10,000# gae valve with pressure
gauge, (6) 4” x 10,000# gate valves, (1) 2” x 5,000# adjustable choke, (1) 2” x
5,000# positive choke
All Mounted on 3 Axle Trailer, w/Hydraulic Utility
Winch, Folding Walkways, w/Stairs, Fuel, Air, Water & Hydraulic Tanks, Work
Platform, 10.00R20 Tires, Weight Indicator, Torque Indicator
SUBSTRUCTURE 12’H X 14’W X 35’L Box Type Substructure Rotary
Beams, V Door Ramp, Stairs Safety Rails, 6’ H Back On Ramp.
MUD PUMPS ((2) Continental Emsco F 650 triplex pumps, powered
by Caterpillar 379 Diesel Engines, Skidded, Forge steel fluid ends w/treated
caps, pulsation dampers, 2” shear relief valves, type D pressure gauge, V belts
w/guards, serial # 4 and 20
GENERATORS (2) 3406C, 320KW CAT SR4 generators, w/Electric
Starter, Radiators, Gauges, Control Panel, mounted, 75 Kw single phase transfer
mounted on 8ft x 32ft Heavy Float Trailer, w/Rails, Catwalk, 5hp Shop Air
Compressor, Dog House, Stairs, etc.
HydraulicPOWER UNIT 1 CAT 3054 Hydraulic
Power Unit with Quick release Hydraulic Hose connections and 30 gallon
reservoir.
TWO PIT MUD SYSTEM 5’h x 7’10” x 30’l Mud Suction Tank w/double
Compartment, Flat Bottom, Internal Plumbing, Mud Agitator, Side Mounted
Walkways, Stairs, Safety Rails, Skidded
5’ X 7’10 X 30’L Mud Shaker Tank w/(3) Compartments,
Flat Bottom, Internal Plumbing, Side Mounted Walkways, Stairs, Safety Rails,
Skidded
Mud Hopper w/Harrisburg 5” X 6” Centrifugal Pump, p/b
50 HP Electric Motor, Skidded
Halco 5” X 6” Centrifugal Pump, p/b 50 HP Electric
Motor, Skidded
Brandt Mini Cobra Double Screen Shale
Shaker
Brandt 4 Cone
Desilter
SWACO Single Cone Desander
ROTATING AND TRAVELY EQUIPMENT
Brewster 18” X 44” Rotary table w/Split Master
Bushing
Ideal 150 Ton Block/Hook Combination with/4 Sheaves 1
1/8 line
SWIVEL Brewster 6SX 220 ton Swivel
RIG HOUSES Parts House, 8ft x 15ft, Rounded Top,
Skidded
WATER/FUEL TANKS Fuel tank, 7,700gal horizontal 8’X 20’.6” with
Centrifugal Positive Pressure Pump and Black Iron Fuel Lines
500 BBL Water Tank / mobile Frac Tank
AUXILLIARY
EQUIPMENT
MARTIN – DECKER Clipper 0 – 360,000# Weight
Indicator
Wire Line Unit, Electrically Controlled
4’ID X Approx. 50’L Rotary Hose, 5000 psi
2 (2) 8”ID X 5”L Suction Hose/Vibrator
hoses
4’H X 8”W X 30’L Junk Box, Skidded
Florescent Rig Lights w/Wiring
Approx. 1000’ of 1 1/8” Drill Line w/Spool,
Stand
Koomey 3 Station Closing Unit, S/N 10956, w/(4) 10
Gallon Accumulators, (2) Air-
Operated Hydraulic Pumps, Stainless Steel Flexline,
mounted on Doghouse Porch
4 ¼” X 37’ Square Kelly and Square Kelley
Bushing
BJ Type B and Wooley Rotary Tongs
Cam Tech SSW 30 hydraulic pipe spinner
WELL CONTROL Regan 3.000 #
annular
DRILL PIPE AND
COLLAR
16 – 6” Slick Drill Collar
5,363 ft. of mixed grade and Quality 4” 14.0# F.H.
approximately 2,637 ft DWB, total of
8,000 feet all hard banded
CLEANED AND PAINTED
Price:
$2,400,000
These rigs were
drilling in Mid-Continent United States and are currently stacked. They are in
good condition and ready for use.
Partly built in China under European
supervision. It has since been upgraded for operations in Europe.
Drawworks
ZJ 40 1000HP mechanical with hydraulic disc brake
Mast 141 ft with API hook
load 555,000 lbs
Racking capacity 13 120 ft (4000 m)
Substructure 25 ft
high, 555 00 lb rotary capacity, 320 000 lb set back capacity 21 ft clear under
rotary beams
Travelling equipment 250 ton
Pumps Two F1000 triplex
Rotary table 27-1/2 in
Generator sets Two Caterpillar D379B with 500 kVA
generators housed in an acoustic enclosure
Mud system Four tank system with
total capacity 1500 bbl, seven agitators and vacuum degasser
Shakers Three
Derrick hi-speed Super-G linear motion shakers
BOPs Annular preventer 5M NACE
trim Cameron double gate 5M NACE trim with blind and pipe rams
Accumulator
Koomey 6-station 160 gal unit air operated with air and electric charge
Pumps
Choke manifold Nine valve 5M WKM choke with one auto choke and one
manual adjustable choke
Tubulars 15 000 ft 5 in 19.50 lb/ft Grade G-105 drill
pipe with 5 in XH Connections
12 x 8 in drill collars with 6-5/8 in Reg
connections
18 x 6-1/2 in drill collars with 4-1/2 in IF connections
Pipe
spinner Varco SSW-30 hydraulic drill pipe spinner
Iron roughneck 80 00 ft lb
capacity for 8 in drill collars to 3-1/5 in drill pipe
Casing tong Hydraulic
casing tong with jaws for 13-3/8 in to 5-1/2 in
Fork truck JCB 540-70 with
forks and safety pipe grabs
Buildings Toolpusher unit, welfare unit for
crews, tool shack and stores unit
The rig is fully equipped and includes an
inventory of spares and consumables and is ready for work.
Manufactured
2006
Derrick, Pemco 104/240 8 lines
Draw works, model DD260
Sand line
drum, line size 9/16 brake size 60 inch
Max single line pull
41500
Engine, Caterpillar C-15
Transmission, Allison model 5610
2
Steering axles, Eaton model 20F4
Tandem rear end, Eaton ratio 6:17 tag
axle
Winch, Tulsa 707 W model 81485
4 Hydraulic leveling jacks
Manufactured
2007
Derrick, DR214401 96-250 8 lines
Draw works, model 5DH22098 By
Service King
Sand line drum, line size 9/16 42 inch x 8 inch
5DH2218
Tubing drum, 1 inch tubing line lebus groove 42 inch x 12 inch drum
brakes
Safety disc brake, Double 4 inch x 7 inch x 48 inch air operated disc
brake
Engine, 60 Series Detroit
Transmission, Allison model 5610
2
Steering axles, 3VD00005 by Service King
Tandem rear end, Eaton with 1-tag
axle
Winch, Tulsa
4 Hydraulic leveling jacks
Trailer, Year model 2007, 48’
Fontain
Triplex pump, Tulsa TT560, with chain reduction
Pump Engine, 60
series Detroit, 500 HP motor with control panel
Transmission, Allison HT750
with Wilson kit, shifter and actuator
Hydraulic engine, 3054 Cat
(2)
MCM centrifugal pumps, 5X6 and 4X5 200 series
Stock tank, 75 bbl tank with
sand catching trough, suction and dumps
Shaker, Derrick 4 x 5 motion
shaker
Fuel Tank, 300 gallons
Flow Monitors, Turbine, model
FM0208
Barrel Counter, Turbine
Control House, 6 x 6 x 8 steel house with
window and heat
(2) 2007 POWER SWIVELS
Mounted on a
dual axle gooseneck trailer 2.5 power swivel 3054 Cat engine power reels of 100
ft hydraulic 90 gallon fuel tank and 50 gallon hydraulic tank
Currently working
Price: $540,000 for each reverse unit which is composed of
one pump and one power swivel.
Carrier All above mounted on Challenger Tri
Axle Trailer with Detroit 8V-92 diesel engine electric start, Radiator, Gauges,
Allison HT-750 transmission, (2) 4,000 lb. hydraulic hoist, Quincy 325 air
compressor, Halliburton F-300 Hyd. Wrieline unit, (1) Hydraulic Reservoir, (2)
500-Gallon fuel tanks, (4) Hydraulic leveling jacks, Folding walkways with (1)
stair, Safety rails, 18R22.5 front & 11R20 dual rear tires
Substructure T-Type 10’ H x 8’ W x 40’L
cross brace substructure with 100,000 lb. setback, 150,000 lb. casing load with
rotary beams, V-door ramp, Stairs, Safety rails & deadline anchor, 12’ W x
40’ L mud boat
Mud Pump #1 Wilson 600 duplex independently
powered by Detroit HV-71 engine
Mud Pump #2 Wilson 600 duplex independently
powered by Detroit HV-71 engine
Rotating Equipment Howard turner 18” rotary table with
split master bushings, Howard Turner 75 ton swivel, Venture tech V36K power sub,
6,800 lb. torque @ 20 rpm
Traveling Equipment (2) McKissick 75 ton blocks with (3)
28” sheaves, 7/8” line, 1 set (2) 3” dia. X 108” L elevator bails
Well-Control
Equipment Washington rotating
head with 9” x 3M flange, Regan 10” x 3M annular blowout preventer, Cameron
3-station closing unit with 80 gallon spherical tank, Gardner-denver triplex
pump, gauges, skidded
Houses Shopbuilt 8’ W x 32’ L Tandem axle
tool pusher’s house, fully furnished, shopbuilt 8’ W x 21’ L parts house with
lights, cabinets, parts bins, skidded
Generator/Utility
House Two (2) Olympian 100Kw.
Ac generator powered by Perkins 6-cylinder diesel engine with electric start,
Radiator, Gauges mounted on dog house trailer, 75 KVA, Cutler hammer electric
panels, Shopbuilt 8’ W x 25’ L dog house with ‘W x 8”2” L change room with 12
lockers, electric heater, knowledge box, bench seat, refrigerator, microwave,
lights, All above mounted on 8’ W x 56 L Tandem axle trailer
Mud System Two 250 bbl. tanks, Two (2) Mission
2” x 3” centrifugal mixing pump with marathon 10 HP electric motor, Mission 2” X
3” centrifugal mixing pump marathon 10 HP electric motor
Fuel/Water Trailer 200 Bbl Water tank, 3,000 gallon
fuel tank, mounted on 10” x 40’ L Tandem axle trailer
Instrumentation Martin Decker 340,000 lb weight
indicator with pump pressure gauge, Tong line gauge
Drill Pipe and Drill
Collars TBD
Handling Tools Woolley Type C rotary tongs with
“shorty” arms, Web Wilson 3-1/2” drill pipe elevators, set of 2-78” drill pipe
elevators, Safety clamp, Drill pipe slips
Ancillary Equipment Two (2) Shopbuilt 7” 9” W x 32’ H x
37 L pipe tubs, One (1) with center walk, Skidded, 1 set pipe racks, 3” x 54 L
Rotary hose, (2) 6” x 8’ L suction hoses, (2) 3 ½” x 22’ L vibration hoses,
Hotsy steam cleaner, Case 1150 bulldozer, Miscellaneous spare parts, hand tools,
valves, fire extinguishers, etc.
Carrier All above mounted on Challenger
Tri-axle trailer with Detroit 8V-71 diesel engine with Allison HT-750
transmission, (2) – 4,000 lb. Hydraulic winches, (1) Quincy air compressor model
325, (1) Halliburton F-300 Hyd. Wireline unit, (4) leveling jacks, (2)-500 gal.
fuel tanks, Folding walkways, Stairs, Safety rails, 11.00R20 tires
Substructure T-type 10’ H x 8’ W x 12’ L back on
ramp type substructure with 8’ 3” clear height under rotary beams, 100,000 lb.
setback, 150,000 lb. casing load with rotary beams, V-door ramp, Stairs, Safety
rails, Dead-line anchor, 12’ W x 40’ L Mud boat
Rotary Table 18” Howard Turner with split master
bushings
Blocks 2 each 75 ton McKissick with (3) 28”
sheaves, 7/8” line
Swivel Howard Turner 75 ton
Elevator Bails 2 each 3” D x 108” L
Power Sub Venture Tech PS-6K
Accumulator 3 station closing unit, with 80
gallon spherical tank, Triplex pump
BOPs Regan 10” 3000 PSI
annular
Rotating Head Washington 3000# 9”
flange
Mud Pump #1 National 7-P-50 500HP triplex
powered by Cat D-379 engine
Mud Pump #2 Wilson 600 duplex powered by
Caterpillar 3408B engine
Mud System (2) Shop built 250 Bbl bulk tanks, ,
(2) Godwin trash pump, powered by John Deere 4 cyl. diesel engine mounted on
single axle trailer
Generator/Utility
House Shop built 8’ W x 8’ 6”
H x 10’ L, 4,900 gallon fuel tank with mission 1 1/8” pedestal fuel pump with
10HP US electric motor
Quincy air compressor model
325, powered by 10HP WEG electric motor,
Hobart 10,000 Watt welding
machine,
All above mounted on 8’ W x
48 ‘ L Great Dane tandem axle trailer
Instrumentation Martin Decker “Hydro-Weight Special”
weight indicator with pump pressure gauge and tong line pull gauge, Martin
Decker “Clipper” weight indicator
Handling Tools Wooley type C rotary tongs with
“Shorty” arms, (1) set of Web Wilson 3 ½” drill pipe elevators, (1) set of 2
7/8” drill pipe elevators, (1) set of Varco 3 ½” slips, (1) set of Varco 2 7/8”
slips, (1) Baash-Ross DC safety clamp
Ancillary Equipment
Pipe Tubs-(3) drill pipe
& (1) center walk
Pipe Racks – (1 set) 3’ H x
20’ L
Rotary Hose-(1) 3” x 54’
L
Suction hose-(2) 8” x 20’
L
(1) shop built 8’ W x 32’ L
toolpusher’s house with office and sleeping quarters, Tandem axle
(1) Shop built 8’ W x 25’ L
driller’s dog house with lockers, knowledge box, bench storage, lighting,
heater, microwave, skidded
(1) Shop built 8’ W x 20’ L
parts house with lights, parts bins, bench storage, skidded
(1 lot)
Winterization
(1) Caterpillar D-6M
bulldozer
(1 lot) Miscellaneous spare
parts, hand tools, valves, fire extinguishers, etc.
Carrier All above mounted on Dickerson
Tri-Axle trailer with Detroit 8V-92N diesel engine with electric start,
Radiator, Gauges, Allison CLT-750 transmission, (2) Koenig 2,500 lb. hoists,
Halliburton wireline unit, (1) Hydraulic reservoir, (2) 500-gallon fuel tanks,
(4) Hydraulic leveling jacks, Golding walkways with stairs, Safety rails,
18R22.5 front tires & 11R20 rear tires
Substructure Shop built 8’ 6” W x 10’ L Drive-on
ramp type substructure with 100,000 lb. setback, 150,000 lb. casing capacity,
Rotary beams, V-door ramp, Stairs, Safety rails, Deadline anchor
Mud Pump #1 National 7-P-50, 550 HP triplex
independently powered by Cat D-379 diesel engine
Mud Pump #2 Wilson 600 duplex mud pump
independently powered by Detroit HV-71 diesel engine
Power Sub Venture Tech PS-6K
Rotating Equipment Howard Turner 18” rotary table with
split master bushings, Howard Turner 75 ton swivel, 4-1/4” dia x 40’ L square
Kelly
Traveling Equipment (2) McKissick 75 ton blocks with (3)
sheaves f/ 7/8” line, 3” x 108” L elevator bails
Well-Control
Equipment Regan 10” x 3,000
psi. annular blowout preventer, Cameron 4-station closing unit with Triplex
pump, Gauges, (4) 20-gallon accumulator bottles, Electric/Air pump,
skidded
Houses
8’ W x 32’ L Tandem axle
toolpusher’s trailer, fully furnished
Shop built 8’ W x 18’ L
Driller’s doghouse with round top, (5) lockers, Bench storage, Lights, Heater,
200 Bbl. Water tank, 8,000 Gallon fuel tank, mounted on 8’ W x 40’ L Tandem axle
trailer, 10.00 x 22 tires
Shop built 7’6” w x 21’ L
Change house with (13) lockers, Bench, Fluorescent lights, Heater, 7’6” W x 9’L
parts room with shelving, 7’6” w x 6’2” L Fuel tank, mounted on 7’6” W x 36” L
Tandem axle trailer, 10.00 x 22 tires, 10-hole budd wheels.
Shop built 8’ W x 10’ L
parts house skidded
Generator / Utility
House
No.1 – Olympian 100 KW. AC
generator powered by Perkins 1066-6TG diesel engine with electric start,
Radiator, Gauges, Mounted dog house trailer
No. 2 – Olympian 100 KW. AC
Generator powered by Perkins 1066-6TG diesel engine with electric start,
Radiator, Gauges, Mounted dog house trailer
Shop built 2’ W x 4’ H x 9’
L, 4-compartment Lubester, Mounted utility house
1-Stage air compressor
powered by 5HP electric motor, Mounted on 50 Gallon air receiver tank
All above mounted 8’ W x 30’
L Utility house, Skidded
Mud System (2) 250 Bbl. Bulk Tanks, (2) Mission
magnum 2” x 3” centrifugal pump, electric motors
Instrumentation
Martin Decker “The clipper”
340,000 lb weight indicator, Martin Decker “Hydro-Weight Special” 320,000 lb
weight indicator with pump pressure gauge
Drill Pipe TBD
Drill Collars TBD
Handling Tools Woolley Type C rotary tongs, Web
Wilson 3-1/2” drill pipe elevators, Set of 2-7/8” drill pipe elevators, Varco
drill pipe slips, BASSH-ROSS DC safety clamp
Ancillary Equipment (2) shop built 7’9” W x 32” H x 37’
L pipe tubs, (1) with center walk-skidded, (1) set of (2) 3’ H x 20’ L Triangle
pipe racks, 3” x 40’ L rotary hose, (1) 3” Dia. X 16’ L Vibrator hoses, (2) 8” x
12’ L Suction hoses
Miscellaneous spare parts,
hand tools, valves, fire extinguishers, etc.
Carrier: All Above Mounted on Challenger
Tandem Axle Front & Tri-axle Rear Single Man Cab Carrier, w/ Detroit 60
Series Diesel Engine, w/ Allison CLBT-5860 Transmission (2) – 4,000
Lb. Hydraulic Winches, (1) Quincy Air Compressor, Model 325, (1) Halliburton
F-300 Hyd. Wireline Unit, (4) Leveling Jacks, (2)– 500 gal. Fuel Tanks, Folding
walkways, Stairs, Safety Rails, 18R22.5 Front & 11.00R20 Rear
Tires
Substructure: T-Type 10’H x 8’W x 12’L Back
on ramp type substructure with 8’3” clear height under rotary beams, 100,000 Lb.
Setback, 150,000 Lb. Casing Load, w/ Rotary Beams, V-Door Ramp, Stairs, Safety
Rails, Dead-line Anchor, 12’W x 40’L Mud Boat
Rotary Table: 18” Howard Turner w/ Split Master
Bushings
Blocks: 2 Each 75 ton McKissick, w/ (3) 28”
Sheaves, 7/8” Line
Swivel: Howard Turner 50 Ton
Elevator Bails 2 Each 3” D X 60” L
Power Sub: Venture Tech, Model # PS-7K-3000,
7,000 Lb. Torque @ 20 RPM
Accumulator: S&S Gas Powered 2 station
closing unit M/N GE-03030-30, 45 Gal.
BOPs: Hydril 7” 3000 PSI
Annular
Rotating Head: Washington 3000# 11”
Flange
Mud Pump #1 Gardner Denver PAH Triplex
Pump, Hydril K-20-3000 Pulsation Dampener, O'Drill 2” x 5,000 psi Shear
Relief Valve O'Drill 6,000 PSI Pressure Gauge, V-Belt Drive Assembly,
Master skidded w/ Detroit 60 Series Diesel Engine,Allison HT-750
Transimission MCM 5" x 6" x 12" Centrifugal Pump
Mud Pump #2 Gardner Denver PAH Triplex
Pump, Hydril K-20-3000 Pulsation Dampener, O'Drill 2” x 5,000 psi Shear Relief
Valve, Cameron 6,000 PSI Pressure Gauge, V-Belt Drive Assembly, Master skidded
w/ Detroit 60 Series Diesel Engine, Allison HT-750 Transmission MCM
4" x 5" x 12" Centrifugal Pump
Mud System: (1)10'W x 6'H x 37'6"L, 386 Bbl. w/
8'L Porch Extension, (3) Compartments, Flat Bottom, Internal Plumbing, Top
Mounted Walkways, Stairs, Safety Railing, (2) - Mission 5" x 6" x 11"
Centrifugal Mixing Pumps both powered by US Electric 30 HP Electric Motors, w/
(2) Brandt Mud Agitators p/b Allis Chalmer 10 HP Electric Motors, w/ (1)
National DLMS-235 Single Screen Shale Shaker, w/ 48" x 8'H Atmospheric
Degasser.
Generator / Utility
House:
Generator # 1 - General
Electric 300 Kw AC Generator, p/b Cat 3408 DIT Diesel Engine
Carrier: All Above Mounted on Challenger
Tri-Axle Trailer, w/ Detroit 12V71T Diesel Engine, 445 HP, Air Start, w/ Allison
CLBT-5860 Transmission (1) 12,000 Lb. Rowson-Koenig Hydraulic Winch, M/N
S0066, (1) Quincy A
Substructure: Challenger Back on ramp type
substructure, 10' Floor Heigth w/ 8' from Rotary Beams to Ground Level, 100,000
Lbs. Set-Back, w/ Rotary Beams, V-Door Ramp, Stairs, Safety Rails, Dead-line
Anchor, (2) 12,000Lbs. BOP Lifting Hoists w/ Trolly Beams, (2) 20,000
Rotary Table: 18” Howard Turner w/ Split Master
Bushings
Blocks/Hook: Garner Denver 200 Ton Block w/ Web
Wilson "Hydra Hook" 150 Ton
Elevator Bails 1 3/4"Dia. x 96"L 150T
Accumulator: Guangzhou Dongsu Machinery 5-Station
12-11 Gal. Bottle, M/N 0480-5, Mounted on Water Tank Skid, w/
6-Station Remote Control Panel Mounted on Doghouse Skid
(22) 1" Stainless Steel
Armored Covered Hoses
BOPs: 11” 3K Annular Cameron 11" x 5K
Double Ram Preventer w/ (4) 4 1/16" x 5K Flanged Side Outlets
9" 5K x 11" 3K x 24"T
Drilling Spool w/ (2) 2 1/16" 5K Flanged Outlets
3 1/8" x 5K Choke Manifold,
30"Dia x 12'T Degasser mounted on 8'W x 20'L Skid
(1) 3 1/2" x 30'L x 5K
Stainless Steel Armored Covered Hose
Drawworks One (1) Ideco H-44C Single Drum Drawworks 700 HP,
Lebus grooved for 1-1/8” drilling line, Koomey Crown-O-Matic powered by Two (2)
Detroit 8V-71N diesel engines with (2) Allison Mod. CLBT-5860
Transmissions
Catworks One (1) Foster Makeup and
breakout cathead
One (1) drillers
instrumentation box with Martin Decker weight indicator, type clipper, Atlas
pump pressure gauge, tong line pull gauge, rotary torque gauge.
One (1) drillers
instrumentation console with control valves for M/B tongs, mud pumps,
transmission shifters, rotary table and drawworks hoisting clutch.
One (1) Bottom
Change house with 12 each lockers, benches, and insulated with one (1) electric
heater and parts room
One (1) Top Dog
house with Drillers knowledge box, tool box, electrical outlets, Satellite
automatic driller type Apollo and 1 each electric heater. (8'W x 18'L
).
One (1) lot of
rig lights and wiring.
One (1) Web
Wilson Type C safety clamps 5 ½” to 6”
Four (4) pipe
racks, 36” H x 28’ L
Five (5)
Stairways
One (1) V-door
ramp.
Eight (8) 20 lb.
fire extinguishers type ABC.
One (1) lot of
documentation to include rig books, equipment, passports, and drawings.
Drill Pipe TBD
Drill Collars TBD
Cross Over Subs Numerous cross over
subs
Bit Subs Two (2) each bit subs,
4-1/2” I.F. box up by 4-1/2” regular box down, bored for Baker float.
Two (2) each bit
subs, 3-1/2” I.F. box up by 3-1/2” regular box down, bored for Baker
float.
Handling Tools One (1) set Varco,
4 1/2” drill pipe slips w/ 4” dies, One (1) set Varco drill collar slips, 6”
O.D.
Elevators One (1) each Wooly 4“
drill pipe elevators, One (1) each Bash Rosh 7” Elevators
Other Items / Kelly &
Saver Subs
One (1) 40’L x 4
¼” Square Kelly
One (1) Foster
model 77 Kelly Spinner
One (1) Varco
4KRUS Kelly drive bushing, Square drive
Drill Collar Lift Nipples
and Accessories N/A
Kelly Valves / Float
Valves One (1) each
TIW upper Kelly cock, Two (2) each TIW lower Kelly cock
Winterization Rig tarps f/ floor &
sub & derrick board, Two (2) electric heaters.
Drawworks One (1) OIME SL-5
drawworks 700 HP, Parmac 343 Hydromatic brake, drum grooved for 1 1/8” drilling
line, Crown-o-matic
Catworks One (1) OIME C-7, 400
HP, with torque tube with one each model 37AH make up cathead and one model 24AH
break out cathead
Mast One (1) Parco 550-K
cantilever mast, 131’ tall mast with mast stand, Tong counterweights, Ladder,
Derrick climber, Geronimo Static hook load with 10 lines – 550,000 lbs maximum
wind 85 MPH, with 4 inch 5,000 psi standpipe & standpipe manifold
Substructure One (1) substructure Parco split level,
550,000 lb hook load with maximum pipe setback capacity 400,000 (simultaneous)
18’ height above ground with 15’ clear height under the rotary table
Rotary
Table One (1)
Pyramid-Hacker 27-1/2” rotary table rated at 275 tons, disk back brake system
with split rotary table bushings
Engines Three (3) Caterpillar
3408B engines 375 HP each with Allison CT6061 transmissions on
compound
Mud Pumps Two (2) 1000HP triplex
mud pumps independently driven by Caterpillar D-399 Engines
Travelling
Block One (1) Ideco
model shorty, 260 ton traveling block, 5-36” sheaves and 1-1/8” line
Hook One (1) ideco, model
shorty, 260 ton
Elevator
Links One (1) set
elevator links, 2-3/4” x 114” x 300 tons
Swivel One (1) Ideco swivel,
model TL-300, capacity 300 tons
Drill Line One (1) 5000’ of
1-1/8” drilling line with
Deadline
Anchor One (1)
National type D deadline anchor with Martin Decker type E-80 load
cell
Air Hoists Two (2) Ingersoll Rand
K5UL air hoists with 5/8” wire line
Crown Block
Assembly
One (1) OIME
5-36” sheaves and 1-52” fast line sheave grooved for 1 1/8” drilling
Line
Toolpusher’s Trailer One (1) Rig Manager trailer with two
each bedrooms, two bathrooms, kitchen,
laundry
room
Mud
Conditioning Equipment
Mud pits – 720
total barrels 1-270 bbl suction pit with four compartments, three Brandt 10HP
mud agitators, one mixing mud hopper and one 50 HP 5 x 6 Halco 2500 supreme
centrifugal pump.
1-200 bbl
shale pit with four compartments, 1-Brandt 10HP mud agitator and 3 each per tank
3” mud guns with 1 ¼” nozzles
1-250 bbl
storage pit with two HP mud mixers powered by one 5 x 6 centrifugal
pump
One (1)
Derrick mud cleaner FLC 3 panel with 20-4” desilter cones powered by 50HP MCM 5
x 6 Centrifugal pump
One (1)
Harrisburg desander with 1-12” desilter cone, powered by 50HP MCM 5 x 6
centrifugal pump
Two (2)
Derrick flow line cleaners
One (1) mud
bucket with 5 and 3-1/2” inserts, discharge hose to the flow line
One (1) mud
line, manifold: 4” 5000 psi mud line with 6-4” 5000 psi Demco gate
valves and
3-4” 5M# vibrator hoses
One (1) rotary
hose, 3 ½” ID with 4” unions, 5000 PSI WP, length 60’
BOP
Equipment
One (1) Hydril
annular BOP, 13 5/8” , 2000 psi stud top and 13 5/8” flanged bottom 3000
psi
One (1)
Washington rotating head series 1300, 13 5/8” bottom flange 3000-5000 psi, 150
psi WP
One (1)
Cameron double BOP, 13-5/8” 5000 psi, type U, flanged top and bottom with
4-3-1/16” 5000 psi outlets and standard 11” cylinders
One (1)
Cameron gate valve, manually operated, 4-1/16” 5000 psi
One (1)
Cameron gate valve, manually operated, 2-1/16” 5000 psi
One (1) choke
line, armored fire resistant API flexible hose 3” 10,000 psi, 3” ID, API 4 1/16”
flanged both ends, 44’ 8” long
One (1) Kill
line, steel flex hose, 5000 psi, 2” ID, API fig 1002 hammer unions
One (1) choke
manifold with 2 each 4 1/16” 5000 CIW Type FC manually operated gate valves, 5
each 3 1/16” 5000 psi CIW Type F manually operated gate valves, 1 each 5000 psi
4” Oteco manual operated valve 2 each 5000 psi 2 1/16” Cameron manually operated
gate valve, 1-4 way tee block, 2 each 2 1/16” 5000 psi manual operated hydraulic
choke, 8-5/8” OD header pipe, 2-3-1/8” 5000 psi flanges and 1-4-1/8” 5000 psi
flange
One (1) Air
remote control unit mounted inside top dog house with access to control valves
from the rig floor
One (1) lot
colflex BOP hoses, One (1) Degasser
Air
Compressors
One (1) Quincy
piston compressor, model 390LVD-A, with 20 HP electric motor and 300 gallon
receiver tank
Two (2) air
dryer, Airtek desiccant type, model TW55 T( 4103-09K, (arctic class)
Handling
Equipment One (1) set
Woolley type B tongs, with jaws for 3-1/2” to 10-3/4”, 11-3/4” and
13-3/8”
One (1) Oil
works Kelly spinner with RH & LH air drive motors, 6-5/8” regular Box &
Pin
Drill
Collars TBD
Drill Pipe TBD
Miscellaneous Equipment
One (1) 550
bbl water tanks, two (2) each 3 x 4 centrifugal pumps with 25HP AC electric
motors
One (1) 285
bbl fuel tank, 2 each 3.5HP 1 x 1 ½ centrifugal pump, 2 each Roper transfer
pumps and Winslow duel sock fuel filter system
One (1)
utility house with accumulator unit, (1) each Koomey model 80, 5 station, 12-20
gallon bottle (10gallon useable fluid), powered by Koomey triplex pump powered
by 10HP electric motor and two air driven pumps
Two (2)
Armstrong generators, each generator 300 KW, 480 volts, each powered by an Ideco
engine, one AC transformer main rig power KVA 45, one AC Transformer KVA 45 on
separate skid, both air cooled and diesel fuel day tank
One (1)
Westinghouse control panel, dual generator system with nine (9)
breakers
One (1) Quincy
piston compressor, model QR390 with 20HP electric motor and 400 gallon receiver
tank
One (1) Totco
drilling recorder to indicate drilling depth and record rate of penetration,
weight of drilling assembly, pump pressure
One (1)
drillers instrumentation box with Martin Decker weight indicator, type clipper,
Atlas pump pressure gauge, tong line pull gauge, rotary torque gauge
One (1)
drillers instrumentation console with control valves for M/B tongs, mud pumps,
transmission shifters, rotary table and drawworks hoisting clutch
One (1) lot
utility suitcase, with Koomey lines, water lines, steam line, air line and
electric cables inside
One (1) Mathey
wireline unit with 15,000’ of .092 wire line, 15HP electric motor Two (2)
Flapper type float valves (6” & 8”)
One (1) bottom
change house with 19 each lockers, benches and insulated with one (2) electric
heater and parts room (10’ x 40’)
One (1) top
dog house with drillers knowledge box, tool box, electrical outlets, satellite
automatic driller type Apollo and 1 each electric heter (10’ x 30’)
One (1) set
rig mats, 8’ x 12’ x 6’
One (1) lot of
rig lights and wiring
One (1) each
of drill collar clamp for 9-1/2” and 6-3/4” drill collars
Four (4) pipe
racks, 28’ length x 43” high
Other
Equipment Available by Negotiation
Tesco 250 ton
HMIS Top Drive complete with rails and full set of controls. Powered by portable
Tesco power unit with Detroit 60 series engine
Kelly Drive
Bushings 4-1/4" Hex,
Square Drive Kelly Bushing
Kelly
Spinner Oil Works 1500
Kelly Spinner
Elevator
Bails 250
Ton
Power
Swivel Venture Tech,
Model # XK-150, 150 Ton, 12,000 Ft/Lb. Torque @ 5,000 Psi.
Power
Swivel Unit Venture
Tech, p/b Caterpillar C-9 Diesel Engine
Accumulator 5 Station, 295 Gal.
Tank, (12) 11 Gal. Accumulator Bottles Mounted on Water Tank Skid, w/5 Station
Remote Control Mounted in Doghouse
BOP
Equipment Hydril 11” x
5,000 psi Annular, Cameron Type “U” 11” x 5,000 psi 11" x 5K x 24"H Drilling
Spool w/ (2) 4 1/16" 5K Side Outlets
Choke Cameron 3 1/8" x 5K,
w/ (1) 5 way Block, (8) 3 1/8" x 5K Gate Valves, (1) 2 1/16" x 5K Gate Valve,
(2) 3 1/8" x 5K Adjustable Chokes, (1) Buffer Chamber
Degasser 30"Dia x
12'L
Choke Line (1) 4 1/16" x 5K Gate
Valve, (1) 4 1/16" x 5K HCR Valve
Kill Line (2) 2 1/16" x 5K Gate
Valve, (1) 2 1/16" x 5K Check Valve
Mud Pump
#1
National
8-P-80 Triplex Pump, 800 HP., Hydril K20-5000 Pulsation Dampener, Oteco 3” x
5,000 psi Shear Relief Valve, Teolegraph Pioneer Type D 0-6,000 PSI Pressure
Gauge, Bridges Equipment Chain Drive Assembly, Master skidded w/ Caterpillar
D398 Diesel Engine, Air Start, MCM 6" x 5" Centrifugal Charging
Pump, MCM 3" x
2" Centrifugal Liner Wash Pump
Mud Pump
#2
National
8-P-80 Triplex Pump, 800 HP., Hydril K20-5000 Pulsation Dampener, Oteco 3” x
5,000 psi Shear Relief Valve, Type D 0-6,000 PSI Pressure Gauge, Chain Drive
Assembly, Master skidded w/ Caterpillar D398 Diesel Engine, Air Start, National
Torque Converter M/N C-300-64, MCM 6" x 5" Centrifugal Charging Pump, Mission
Pedestal 3" x 2" Centrifugal Liner Wash Pump
Mud
System
Two (2) pit,
700 bbl complete with four (4) 5”x6” centrifugal mixing pumps each powered by 50
HP electric motors, five (5) agitators each powered by 10 HP electric
motors.
Two (2) Fluid
Systems, Inc. High G-Force Linear Motion Shale Shakers
One (1) Fluid
Systems, Inc. Vacuum Degasser
One (1) Fluid
Systems, Inc. 3 - Cone Desander (10”Cones)
One (1) Fluid
Systems, Inc. 12 - Cone Desilter (4” Cones)
Generator /
Utility House
Generator # 1
- Detroit 350 Kw AC Generator, p/b Detroit Series 60 Diesel Engine, Electric
Start
Generator # 2
- Detroit 350 Kw AC Generator, p/b Detroit Series 60 Diesel Engine, Electric
Start
75 KVA
Transformer
#1 Air
Compressor - Quincy M/N QR390, p/b 20 HP Baldor Electric Motor
#2 Air
Compressor - Quincy M/N QR390, p/b 20 HP Baldor Electric Motor
(2) Elite
Series ECP80 Refrigerated Air Dryer
(1) 120 Gal.
Air Receiver
All Above
Mounted in 10'W x 40'L Skidded House
Water
Tank
(1) Shop Built
10'W x 8'H x 30'L 425 Bbl. Water Tank w/ 20' Covered Porch
(1) Double
Life 3" x 4" x 13" Centrifugal Water Pump p/b 30 HP Electric Motor
(1) Double
Life 3" x 4" x 13" Centrifugal Water Pump, p/b 30 HP Electric Motor
Fuel
Tank
12,000 Gal.
Fuel Tank w/ 8'W x 12'L Pump House, w/ O'Drill Fuel Filter & (2) Roper 2AM12
Fuel Pumps p/b Baldor 5 HP Electric Motors, 4 Compartment Lubister, Shelving
Dog House 8'W x 20'L Dog House
w/ (3) Lockers, Knowledge Box, Bench Storage, Lights, Heater
Change /
Parts House 10'W x
40'L Skid w/ 20'L Parts House w/ shelving, w/ 17'L Change House w/
(20) Lockers,
Bench, Lights, Heater, Table
Instrumentation Atlis Instrumentation Type FS, 300,000
Lb. Weight Indicator, w/ Pump Pressure Gauge and (2) Tong Line Pull Gauges,
Rotary Torque Gauge, Atlis Instrumentation Automatic Driller 3-Pin Drilling
Recorder
(1) Five Star
Wireline Retriever w/ 15,000' of .092 wire
Handling
Tools
(1 set) Type B
Rotary Tongs w/ 3 1/2" - 5", 5" - 6 3/4", 6 5/8" - 9" Jaws
(1 set) Type C
Rotary Tongs w/ 3 1/2" - 5", 5 1/4" - 7" Jaws
(1) 4" Woolley
225 Ton Drill Pipe Elevators
(1) 4" Woolley
Drill Pipe Slips
(1) Type A 5
1/2" to 7" DC Slips
(1) Type A 6
3/4" to 8 1/4" DC Slips
(1) 6 1/4" DC
Safety Clamp
(1) 8" DC
Safety Clamp
(1) Pipe
Spinner, Air Operated
Drill Pipe
and Drill Collars TBD
Ancillary
Equipment
(1) 5'W x 18"H
x 50'L Catwalk 2 Pieces
(4 set) 18"H x
30'L Pipe Racks
(1) 3 1/3" x
55'L Rotary Hose
(3) MDL 800
Bug Blowers 24", 36", 48"
(1) 8' x 20'
Parts Container w/ Shelving, Lighting
Drawworks: Cabot 750
Drawworks, Model 2042, Main Drum Lebus Grooved For 1-1/8” Drill Line. Drawworks
Powered By Two (2) Detroit Diesel Series 60 Engines With Allison Model 5860
Transmission.
Auxiliary Brake: Parmac 202 Hydromatic Brake.
Mast: Cabot
112 Ft. Clear Height, 300.000 Lb Static Load Capacity (Eight Lines Strung) 4-Leg
Telescoping Mast. Complete With Cabot Crown Block, With Five (5) 30” Dia.
Sheaves Each Mounted On A Shaft With Roller Bearing And Grooved For 1-1/8” Wire
Line And One (1) 36” Dia. Fast Line Sheave And One (1) 30” Dia. Dead Line Sheave
Both Grooved For 1-1/8” Wire Line.
Substructure: Crown T-Type Hydraulically
Telescoping Substructure. 15 Ft. Floor Height And 12 Ft. Clear Height Under
Rotary Beams. Rotary Load Capacity Is 350,000 Lbs. And Setback Capacity Of
200,000 Lbs. Simultaneous Load Of 550,000 Lbs.
Traveling Equipment: One (1)
Mckissick Type “Rj” 150 Ton Triplex Hook/Block Combination. Complete With Four
(4) 30” Dia. Sheaves Grooved For 1-1/8” Wire Line. Hook Is Spring Loaded With
Hydraulic Snubber.
One (1) Brewster Model 6bx, Swivel
One (1) 4-1/4”
Square Kelly. 38 Ft. Long.
Rotary Table: One (1) Zp1750, National Style
17-1/2” Rotary Table. Table Complete With Split Body Square Drive Master
Bushing. Table Is Propeller Shaft Driven Via Full Air Rotary Clutch, Heavy Duty
Reverse Gear Box And Oil Bath Roller Chain Elevated Rotary Drive Unitized On
Back Face Of Mast.
One (1) 20 Hds Kelly Bushing For 4-1/4” Square
Kelly.
Well Control Equipment: One (1) 11” Annular, Hydraulic Blowout
Preventer, 5000 Psi, Wp.
One (1) 11”, 5000 Psi Wp Double Ram Type Hydraulic
Blowout Preventer. Studded Top And Bottom.
One (1) Cameron Style 4-1/16” X
5000 Psi Wp Hydraulic Operated Gate Valve
One (1) Cameron Style 4-1/16” X
5000 Psi Wp Manual Operated Gate Valve
Two (2) Cameron Style 2-1/16” X 5000
Psi Wp Manual Operated Gate Valve
One (1) Cameron Style Check Valve 2-1/16” X
5,000 Psi Wp
One(1) 4-1/16” X 2-1/16”, 5,000 Psi Wp Choke Manifold. One (1)
36” Od Atmospheric Degasser. Unitized On A Single Oilfield Type Skid
One (1)
5 Function Accumulator Unit. Complete With Twelve (12) Eleven (11) Gallon
Accumulator Bottles, Triplex Pump Driven By 25 Hp A.C. Electric Motor And Air
Operated Back Up Pump. One (1) Air Remote Drillers Panel Installed On Drill
Floor.
Mud Pumps: Two (2) Hong Hua Model F-1000 Triplex Mud Pumps. Powered By
A Caterpillar Model D399 Diesel Engine. Suctions Charged By A 6” X 5”, Series
250 Centrifugal Pumps (Jack Shaft Driven). 5000 Psi Discharge Pulsation
Dampeners, 3” Oteco Style Shear Relief Valve, 0-6000 Psi Pressure Gauge, 4”,
5000 Psi Wp Demco Style Gate Valve For Discharge Line, 2”, 5000 Psi Wp Demco
Style Gate Valve For Pressure Bleed Line. Complete With Lp Suction Valves And
Piping And 4” Hp Welded Steel Discharge Piping. All Unitized On A Welded Steel
Oilfield Skid.
Mud System: Two (2) Tank Mud System Of Approximately 750 Bbl
Total Capacity.
Shaker Tank Of Approximately 384 Bbls With Two (2) 6” X 5”
Series 250 Centrifugal Pumps Powered By A 50 Hp Ac Electric Motor. One (1)
Mi-Swaco Model 6t12, 12 Cone Desilter, One (1) Mi-Swaco Model 210 Horizontal
Desander, One (1) Mi-Swaco “See-Flo” Degasser With 10 Hp Ac Electric Motor, One
(1) Mi-Swaco 7.5 Hp Max2000 Low Profile Horizontal Mud Agitator. One (1)
Mi-Swaco Dual Meerkat 3-Panel Low Profile Selectable Dual Motion (Linear Or
Balanced Elliptical) Shale Shaker.
Suction Tank Of Approximately 365 Bbls
With Two (2) 6” X 5” Series 250 Centrifugal Pumps Powered By A 50 Hp Ac Electric
Motor. Four (4) Mi-Swaco 7.55 Hp Max2000 Low Profile Horizontal Mud
Agitator
Water Tank: One (1) 450 Bbl Capacity Water Tank Complete With Two
(2) 3” X 2” Series 250 Centrifugal Water Pumps Powered By 20 Hp Ac Electric
Motors.
Fuel Tank: Cylindrical 10000 Gallon Capacity, Skid Mounted And With
200 Gallon Lubester. Two (2) Independent Gear Pumps Driven By 5 Hp Electric
Motor.
Electrical System: Two (2) Detroit Diesel Series 60, 370 Kw
Generators. Complete With Switchgear And Transformers.
Auxiliary Equipment:
One (1) Retriever Wireline Measuring Unit Complete With 15,000 Ft. Of 0.092”
Wire Line.
One (1) Ingersoll Rand Model Fa2.5 Air Hoists Complete With 5/8”
Wire Line.
Compressed Air System: One (1) Quincy Model “Qsb-40” Air Cooled
Rotary Screw Packaged Air Compressor Unit Delivering 165 Cfm At 125 Psi And
Powered By A 40 Hp Ac Electric Motor And Complete With Modulation Controls.
Complete With A 200 Ga. Air Receiver.
One (1) 200 Ga. Horizontal Air Receiver
Mounted At The Substructure.
Rig Site Structures: One (1) Hydraulically
Raised And Lowered Drill Floor House At Driller’s Position Price: $5,200,000
This Rig Is Rigged Up
In The US And Is Available For Immediate Sale And Delivery. It Is Made From New
Or Rebuilt Components. It Is Ready To Be Placed Into Immediate Use.
The 550 is a Double-Drum Drilling, Workover & Well
Servicing Unit. Its mast reaches 104’ above the ground and provides a 250,000LB
static hook load capacity. A Cat C-15 engine, 540 hp with an Allison 5860RB or
equal transmission & torque converter powers the unit. All components are
mounted on a 5-axle carrier.
I. BASIC RIG
CARRIER (5 axle 10 X 4
drive )
• Air brakes on all
wheels
• Tandem front, steering
axles, (rated @ 22,000 lb ea.) (8.2mt.ea.) with 4 spring suspension
• Hydraulic power assist
on steering axles, with ample capacity to provide ease of steering
• Rear tandem driving
axles,(rated @ 50,000 lbs. total) (18.65mt. total) with walking beam suspension
• Air controlled spring
brakes mounted on all rear axles
• Third (non driving)
rear axle with air bag lift suspension rated at 25,000 lb. capacity.
• Wheelbase: 340”(863cm)
front center to rear tandem center
• Fabricated high
tensile steel beam vehicle frame
• Safety tread decking •
• Front and rear tow
bars •
• 4 Internal mast guy
boomers
• 12V battery installed
in battery box
• Highway equipment
includes:
Headlights
Front and rear turn
signals
Clearance lights
Reflectors
Stop & taillights
License plate bracket
Mud flaps behind rear
tires
Air
horns
• One-man cab with heater, defroster, windshield washer
& wiper
• Two - bus type rear
view mirrors
• Adjustable bucket seat
with shock absorber mounts & seat belt
• The cab instrument
panel consists of the following instruments: voltmeter, engine oil pressure
gauge, tachometer, speedometer, fuel gauge, water temperature gauge, and
transmission converter oil temperature gauge
• Engine driven
compressor
o System includes hoses,
fittings, air lines, regulators, and gauges
o 12V electric system
for all instrument lights including wiring, & switches
PLATFORMS WITH HANDRAILS
ON OPERATOR SIDE
Hinged platforms run full length on operator's side of
unit, at bed level. Handrails are attached to the platforms on the operator's
side of the rig and a stairway, with handrails, from platform to ground is
included. Platforms are approximately 2’-0” wide.
100 GALLON FUEL TANK
Two each 100 gal. fuel tanks, side mounted on carrier
frame
FRONT TIRES (FOUR
445/65R / 22.5)
4 front tires – 445 x 65 R x 22.5
16-ply duplex highway treads
Rated at 39,500LB (17.69Mt)
All tires are inflated to 110psi
Disc wheels
REAR TIRES 12 Each 12R x
22.5, 16 PLY
Twelve 12R x 22.5, 16 ply, all-purpose tubeless rear
tires
Rated at 49,120Mt (22.28 Mt)
All tires inflated to 100 psi
Disc wheels
DEADLINE ANCHOR
(HERCULES 118 TYPE)
Standard Hercules 118-type anchor, with line clamp to
fit the deadline used on the rig, attaches directly to carrier frame.
50 GPM (190Lpm)
HYDRAULIC SYSTEM
The hydraulic system is designed to operate at a maximum
of 2,500psi and 50 gpm (190Lpm) @ 2,100 rpm.
Its pump is PTO driven by the transmission. An
air-activated clutch provides pump engagement and disengagement.
The system includes installation of a 195-gal (757L)
hydraulic oil tank with filler cap, breather and a combination oil level/oil
temperature gauge. Also included are manual shutoff valves in the pump suction
line, in the pressure line from pump to various control valves and pressure
ports, and in the return line from filter to tank.
CONTROL CONSOLE
The rig’s control console is located at the operator's
position near the mast providing good visibility of wellhead, traveling block,
and work area.
Console includes:
• Main drum control
consisting of mechanical brake lever
• Air operated clutch
control for main drum
• Air operated hand
control for engine throttle valve
• Hydraulic and air
pressure gauges
• Transmission shift
controls
• Standard engine
shutdown
Operator platform
FOUR HYDRAULIC
JACKSCREWS
Four hydraulic leveling jacks, two mounted in the rear
bumper, and two mounted at the mid-point of the rig remove weight from the truck
axles and provide greater lateral stability. Each jack has an adjustable support
screw with a locking nut feature to remove hydraulic pressure from the cylinder
while the rig is in use.
ENGINE ASSEMBLY
• Cat C-15 with
540hp@2100rpm with limiting speed governor
• Air throttle actuator
• SAE #1 flywheel
housing
• Exhaust diverted to
off-operator side with 85db muffler & spark arrestors
• Permanent type
anti-freeze
• Dry type air cleaner
• Lube & fuel
filters 24cfm (11328 cm2/sec), air compressor driven from engine
• 75A/12V alternator
• 12V electric starting
and additional air start combo.
• High ambient radiator
& fan for 60C rating
• Overspeed emergency
shutdown
• Engine oil pressure
gauge and water temperature gauge
ELECTRIC STARTING SYSTEM
(12 volt)
Rig is equipped with a 12V electric starting system that
includes a starter and 12V battery mounted in recessed battery box with above
deck access.
TRANSMISSION – Allison
5860 Rebuilt
• Allison 5860 six-speed
transmission with converter with oil cooler, including a straight through
with a disconnect clutch for the drawworks with air over
hydraulic dual controls and electric indicators
• Power shift from cab
and rear control
DRAWWORKS, DOUBLE DRUM
MODEL 550/4212-42
MODEL 42x12 MAIN DRUM
WINCH ASSEMBLY
Full air three plate, clutch outside drawworks frame.
Brakes are 42"(106.7cm) diameter x 12"(30.5cm) wide, lined with 1-1/8"(2.9cm) x
12"(30.5cm) x 12"(30.5cm) API drilled brake blocks, full wrap, dead-end
equalized. Brake rims are removable with rings for splash water-cooling.
Brake operation shafts are mounted on ball bearings,
these are self-energized type for positive application and release by operator.
Drum barrel is 22"(55.8cm) diameter x 38"(96.5cm) long, mounted on double row
self-aligning spherical roller bearings on a 6 1/2"(16.5cm) drum shaft. Two line
pockets provided in the drum. Lebus grooving installed for 1” wireline to assist
in spooling and to reduce line wear.
Single line pull is 42,500LB, 2nd layer in first gear @115
psi .
MODEL 42x8 SANDLINE DRUM
Full air double plate 24"(60.9cm) clutch
Brakes are 42"(106.6cm) diameter x 8"(20.3cm) wide lined
with 1"(2.5cm) x 8"(20.3cm) x 12"(30.5cm) API drilled brake blocks, full wrap,
dead-end equalized. Brakes are removable with rings for splash water-cooling.
5 3/4"(14.6cm) drum shaft mounted on double row
self-aligning spherical roller bearings, drum barrel is 16"(40.6cm) diameter x
43"(109.2cm) long.
Full drum capacity of 9/16"(1.4cm) wire line is
14,600'(4450m), or 11,900'(3627m) of 5/8"(1.6cm) line.
SANDLINE DRUM CONTROL
Sandline drum controls consisting of a mechanical brake
lever, a combination air clutch and an engine throttle valve are located on the
operator's side of the winch. An engine emergency kill switch is located in the
control panel along with a clutch control valve.
LUBRICATION
Centralized lubrication system to all bearings and brake
linkage on drawworks. For ease of servicing, all grease fittings on drawworks
are located outside frame.
BRAKE WATER COOLING
Includes air-pressurized water system with 60gal (227L)
reservoir, filler, air and water piping from reservoir to main drum brake rims.
Water piping is complete with control valve at
operator's position. A cutoff valve is also at reservoir to shut off all
pressure to tank.
RIGHT ANGLE GEAR BOX
Heavy-duty, right angle gearbox with oil-bath
lubrication for gears and bearings.
Includes installation on carrier frame, input torque
shaft from transmission to gearbox and powershaft from gearbox to drawworks
drive sprocket.
ASA-140-2 (1-3/4") pitch, double-strand roller chain on
the final drive to the main drum
All chains are in oil-bath case outside the drawworks
frame. A window in side of the chainguard provides an oil level check.
HYDROTARDER
Model 202 hydrotarder, or equivalent with two plate air
clutch, oil bath chain drive, chains and bearings. 325 gal. water tanks, lines,
valves, and plumbing installed on rig. Hydrotarder, includes air controlled
inlet valve and piping for water.
HANDLING WINCH
Hydraulic powered planetary winch – 8,000 lb. Rated line
pull @ 100 f.p.m. and 2,000 psi. Rating is for first wrap on drum. 325 ft. of ½”
line provided with winch. (Fail-safe brake, winch pull-in and run-out is
hydraulically powered.) Winch sheaves provided in crown. Winch controls are
located at rear of unit near operator’s console.
OPEN FACE TUBING
MAST-LCI 104’/250K
MAST: 104’/250K OPEN
FACE TUBING MAST
The mast has a 104’ clear working height with an API
rated static hook load of:
250,000 LB with 8 lines
strung
225,000LB with 6 lines
strung
Open face tubing mast is designed to withstand a wind of
69mph from any direction provided the four jacks on the vehicle are properly
deployed. Telescoping tubing structural mast is designed and
constructed to API guidelines.
Constructed in two sections with the upper section
telescoping into the lower section for over-the-road position. Top section of
mast automatically latches to lower section, when extended. Lock control at base
of mast. Ladder to crows nest on crown. The mast is attached to its support
frame at the pivot point near the rig's rear bumper. It is supported during
roading by a rest (headache frame) near the front of the rig. Each leg of the
lower section contains an adjustable support screw. Mast has large girts and
braces that do not extend inside, for extra block clearance. Mast includes
installation, front rest and two internal load lines to rig from crown.
CROWN
Crown arrangement for 6 or 8 line string-up with
conventional block to hang flat with mast:
Three -24” (60.8 cm) diameter sheave cross-mounted,
grooved 1” (2.86cm)
Two - Hydraulic tong sheaves, grooved 3/8” (.95 cm).
One - Auxiliary winch sheave, grooved 1/2”1.3 cm).
One - 24” diameter sandline sheave grooved 9 1/16”
Crown sheaves are steel with flame hardened grooves.
Sheaves are mounted on Timken tapered roller bearings. Fittings are provided for
individual greasing of bearings. Crows nest (crown platform) provided for safety
when servicing crown sheaves, floor of expanded metal, handrails and toe boards
around crown with entrance at ladder. Attachments for two internal guylines from
crown to rig are provided on crown beams.
TUBING BOARD
• Tubing board, of all
welded construction, is automatically lowered into working position as mast is
telescoped up and is raised into folded position as mast is telescoped down for
roading.
• Tubing board fingers
are adjustable for 18,360’ (5596m) of 2-7/8” (7.3 cm) tubing, or 11,520’ (3511m)
of 3-1/2” (9 cm) drill pipe for end tubing.
• Tubing board is
mounted at 55’ (16.8m) above ground for tubing doubles.
• A 2’6” (.6m, 15.2 cm)
wide monkey board/walkway is included.
• Handrails are
installed around the tubing board for safety
MAST CONTROLS
Raising, lowering and telescoping controls are installed
at operator's position near base section of mast.
RAISING, LOWERING &
TELESCOPING
Mast is hydraulically raised and scoped by hydraulic
cylinders, and upper section is extended by unlocking upper section from lower
section and extending until the spring latches snap into operating position.
Mast is retracted in like manner.
Mast locking pins shall be painted orange.
II. RIG ADDITIONS
CROWN-O-MATIC
Drawworks model crown saving device includes
installation on rig drawworks.
MAST GUYLINES
Four 5/8 “ (1.6 cm) - 6x37 IWRC wire rope guyline to
ground from derrick - 2 required for top-front of crown and 2 required for
top-rear of crown. Two 9/16” (1.4 cm) - 6x37 IWRC wire rope guylines from tubing
board to ground.
Guylines include thimbles, clips, and tail chains and
grab hook.
Six heavy-duty walking load binders for 1/2” (1.3 cm
CATHEADS, DRILLER'S
CONTROL CONSOLE, CROWN-O-MATIC SKYTOP-BREWSTER N-46 SINGLE DRUM DRAWWORKS, LEBUS
GROOVED FOR 1 1/4" WIRELINE, FOSTER MAKE-UP & BREAK-OUT
PARMAC V-80 HYDROMATIC
BRAKE
SKYTOP-BREWSTER INLINE 2-ENGINE COMPOUND WITH (2)
CATERPILLAR D3408 DITA DIESEL ENGINES, RADIATORS, AIR START, (2) ALLISON TC-955
TORQUE CONVERTERS, (2) AIR COMPRESSORS
SKYTOP-BREWSTER SB131-550 CANTILEVER BEAM LEG MAST,
550,000 LBS GNC, (10 LINES), 18' 6" LEG SPREAD, RACKING BOARD, 5-SHEAVE CROWN
BLOCK ASSEMBLY WITH FAST LINE SHEAVE, STANDPIPE WITH (1) OTECO 4" 5,000 PSI GATE
VALVE, (1) OTECO 2" 5,000 PSI GATE VALVE, (1) OTECO MODEL 7 PRESSURE GAUGE,
0-,6000 PSI, WITH MAST STAND
SKYTOP-BREWSTER 16' H x 25' W x 44' L (52' 6" OAL)
BOX-TYPE SUBSTRUCTURE, COMPLETE WITH STAIRS, HANDRAILS, TYPE "D" DEADLINE ANCHOR
AND V-DOOR
(10' H BOXES & (2) 6' H PONY BOXES)
GARNER-DENVER RT-22 1/2" ROTARY TABLE, 22 1/2" x 53
1/4" CENTERS, WITH MSPC MASTER BUSHING
VARCO HDP KELLY DRIVE BUSHING WITH 4 1/4" SQ. ROLLER
ASSY
SKYTOP-BREWSTER 7SX ROTARY SWIVEL, 300 TON
CAPACITY
(1) SET, 2 3/4" x 108" ELEVATOR LINKS, 350 TON
CAPACITY
CATWALK
H-T F-1000 (EMSCO TYPE) 1,000 INPUT H.P. TRIPLEX
PUMP; BELT DRIVEN WITH BELT GUARD, POWERED BY CAT D399 DIESEL ENGINE, 32CB500
DUAL CLUTCH WITH GUARD, RADIATOR, AIR STARTER, WITH 20 GALLON 5,000 PSI
PULSATION DAMPENER, STRAINER BLOCK, OTECO 4" 5,000 PSI GATE VALVE, OTECO 2"
5,000 PSI GATE VALVE, OTECO 3" SHEAR RELIEF VALVE, MISSION MAGNUM 5" x 6"
CENTRIFUGAL PUMP POWERED BY 50 H.P. XP ELECTRIC MOTOR, LINER WASH PUMP (PINION
DRIVEN) WITH BELTS AND BELT GUARD; 300 GALLON FUEL TANK WITH FLOAT SENSOR, AIR
RECEIVER TANK; ABOVE MOUNTED AND UNITIZED ON A OILFIELD MASTER SKID
HHR F-1000 (EMSCO TYPE) 1,000 INPUT H.P. TRIPLEX
PUMP; BELT DRIVEN WITH BELT GUARD, POWERED BY CAT D399 DIESEL ENGINE, 32CB500
DUAL CLUTCH WITH GUARD, RADIATOR, AIR STARTER, WITH 20 GALLON 5,000 PSI
PULSATION DAMPENER, STRAINER BLOCK, OTECO 4" 5,000 PSI GATE VALVE, OTECO 2"
5,000 PSI GATE VALVE, OTECO 3" SHEAR RELIEF VALVE, MISSION MAGNUM 5" x 6"
CENTRIFUGAL PUMP POWERED BY 50 H.P. XP ELECTRIC MOTOR, LINER WASH PUMP (PINION
DRIVEN) WITH BELTS AND BELT GUARD; 300 GALLON FUEL TANK WITH FLOAT SENSOR, AIR
RECEIVER TANK; ABOVE MOUNTED AND UNITIZED ON A OILFIELD MASTER SKID
TOP DOGHOUSE WITH KNOWLEDGE BOX; (1) TOTCO 2-PEN
DRILLING RECORDER; (1) AUTOMATIC DRILLER; (2) Q MARK HEATERS; CREW LOCKERS; SKID
MOUNTED
BOTTOM DOGHOUSE, WITH PARTS BINS, STORAGE BINS; HAND
TOOLS; MISC. RIG SPARE PARTS; CRIMPED WALL, SKID MOUNTED
GENERATOR HOSE WITH MCC MASTER PANEL;
TRANSFORMER; (1) CAT D3408 DIESEL ENGINE WITH CAT SR4 300 KW GENERATOR END; (1)
CAT D3406 DIESEL ENGINE WITH CAT SR4 225 KW GENERATOR END; (1) QUINCY 390 AIR
COMPRESSOR POWERED BY ELECTRIC MOTOR, RECEIVER TANK, BELT DRIVEN WITH BELT
GUARD, (1) MASTER 150,000 BTU HEATER, RIGID BC-810 CHAIN TONG (VISE), PEDESTAL
MOUNTED, ALL ABOVE UNITIZED AND MOUNTED INSIDE GENERATOR HOUSE, THREE RUNNER
OILFIELD MASTER SKID
MUD SYSTEM: 900 BBL
TOTAL CAPACITY WITH:
450 BBL CAPACITY SHAKER TANK; CRIMP WALL; WITH (2)
NOV / BRANDT COBRA II LINEAR SHALE SHAKERS (REBUILT BY BRANDT - INSTALLED JUNE
2008), (2) CONE DESANDER; (8) CONE DESILTER, FULL TANK LENGTH GRATED WALKWAYS,
HANDRAILS, STAIRS, VAPOR PROOF LIGHTING, MOUNTED ON A OILFIELD MASTER
SKID
450 BBL CAPACITY SUCTION TANK; CRIMP WALL; THREE
PARTITION; (1) PILL TANK; WITH (2) MCM 6" x 8" CENTRIFUGAL PUMPS POWERED BY 75
H.P. XP ELECTRIC MOTORS WITH BELTS & BELT GUARD (PORCH MOUNTED); (1) MCM 6"
x 8" CENTRIFUGAL PUMPS POWERED BY 75 H.P. XP ELECTRIC MOTOR WITH BELTS &
BELT GUARD (INSET MOUNTED);(2) MUD AGITATORS POWERED BY 5 H.P. XP ELECTRIC
MOTORS; FULL TANK LENGTH GRATED WALKWAYS, HANDRAILS, STAIRS, VAPOR PROOF
LIGHTING, MOUNTED ON A OILFIELD MASTER SKID
10,000 GALLON FUEL TANK, WITH 4-COMPARTMENT LUBESTER,
SKID MOUNTED
500 BBL WATER TANK, WITH (2) CENTRIFUGAL PUMPS
POWERED BY 25 H.P. ELECTRIC MOTORS; SKID MOUNTED
CIW TYPE "SS" 13 5/8" 3,000 PSI DOUBLE HYDRAULIC
BLOWOUT PREVENTER, STUDDED TOP & BOTTOM
MODEL YG-0320-4 (KOOMEY TYPE 80) CLOSING UNIT (NEW
2006), 4-STATION WITH REMOTE PANEL; (8) 11-GALLON ACCUMULATOR BOTTLES; (1)
TRIPLEX PUMP POWERED BY ELECTRIC MOTOR, CHAIN DRIVEN WITH CHAIN CASE, (2) AIR
PUMPS, XP STARTER PANEL, SKID MOUNTED
CHOKE MANIFOLD WITH (3) 4 1/16" 5,000 PSI W.P. GATE
VALVES; (5) 2 1/16" 5,000 PSI W.P. GATE VALVES; (1) ADJUSTABLE CHOKE; (1)
POSITIVE CHOKE; (1) 4-WAY CROSS; (1) BUFFER TANK ; (1) PRESSURE GAUGE; WITH
SINGLE POINT LIFTING EYE BRACKET; SKID MOUNTED
12,000’ drill depth with 3-1/2” drill pipe, 25,000’
workover depth with 2-3/8” tubing, 1-1/8” drill line, single drum, Ideco Back-In
Rambler rig BIR-8005 6 axle (3 front, 3 rear), mechanical drive from carriers
front mounted (2) GM 12V71T engines 434 hp at 2100 rpm, (2) Allison torqmatic
5680 transmissions (5 forward, 1 reverse), 22” type B double Hydromatic brake,
112’ x 358,000# Ideco AH Swik-Lift telescoping mast, Ideco crossover type crown
with Timken double tapered roller bearings, Sheaves: groove 5/36, 1-42
Fabriform 1-1/8” for 6, 8, or 10 line stringup, traveling block, crown safety
platform with handrails, less toe-boards, racking platform at 71’ to work with
16’ substructure 156 stands in 60’ lengths of 4-1/2” dp or 296 stands in 60’
lengths of 2-7/8” tubing. CARRIER has Steerable Schuler 65,000# capacity
triple steel front acles and spring suspensions sytem, (6) 18-22.5 x 16 ply
nylon front tires with Budd wheels, Clark 60,000# capacity, planetary tandem
steel rear axles with Hendrickson suspension system and a single tag axle, one
man cab. Ideco 260 ton telescoping substructure 16’ height, telescoped to
13/6” and when mounted on a 2’6” subbase provides 16’ height (9’6” for
transport), 320,000# setback capacity, 19’4” wide x 16’4” long floor dims with
walkways extended 11’6” wide and 18” long with walkways folded. Hydraulic
elevating doghouse base (doghouse not included). Ideco UTB-160-4-36
travelling block 160 ton (4) 36” sheaves grooved for 1-1/8” line, Ideco TL200
swivel 200 tons, Ideco 27-1/2” rotary table, Eckel 13-5/8” power hydraulic tonhs
with 5 sets jaws, manual tongs with several sets of jaws, Varco split square
13-9/16” master bushings, 4-1/4” hex kelly, Varco kelly bushing, 2 Omsco 5000
psi kelly valves, Varco kelly spinner, kelly saver sub, lighting system, weight
indicator, torque indicator system, 5 pen drilling recorder, Totco drift
indicator, (2) Mission 5 x 6 centrifugal pumps, (2) Mission 6 x 8 centrifugal
mud mixing pumps. Ideco T1000 7-3/4” x 14” Triplex mud pumps with 950 hp
Cat D398DT diesel engine. 318 bbl mud system shaker tank, 318 bbls mud
system suction tank, shakers, desander, degasser, agitators.
Generator and compressor house with (2) Mustang/Cat 3408 PCT 60 Hz,
1800 rpm, 3ph, 240-480 v, 300 kw standby, 265 kw prime. BOP stack (2)
Hydril ram BOP’s flanged and studded 13-5/8” x 5000#. Handling tools for 4-1/2”
dp and 6” 7” and 8” DC, tools for casing from 4-1/2” – 13-5/8”, tools for tubing
from 2-3/8” – 3-1/2”.
Price: $3,100,000
History:
This rig worked in Ecuador for 15 years, mostly in
workover operations. It drilled 37 wells from 4000ft (1220 mts) to 10,000ft
(3,300 mts) between 1991-1996. From 1996 to the present it has been used in
workover operations. The rig contains a lot of extra equipment, handling tools,
fishing tools, etc.
36”H x 5’10”W x 38’L 2-Section Catwalk
w/ Steel Deck & Steps
(3) 36”H x 6’W x 38’L Pipe
Tubs
(2) 28”H x 6’W x 38’L Pipe
Tubs
Electric/Hydraulic Wireline Measuring
Device
Rathole &
Mousehole
Fluorescent & Mercury-Vapor Rig
Lights w/ Wiring
3000’ 1 1/8”Drill Line (New),
Spool & Stand
PIPE RACKS
2 Sets of (4) 36”H x 34’L Triangular
Pipe Racks
2 Sets (2) 36”H x 11’L Triangular Pipe
Racks
(no drill string with
rig)
Extensive work done to make rig work
ready, including new wiring and lighting, new plumbing (air, fuel, water,
hydraulic), all structural repairs to the main components and repairing or
replacing ladders, steps, handrails, and sheet metal, repairing, rebuilding and
servicing all power units, pumps and drawworks as necessary, doing all cosmetic
repairs including sandblasting, cleaning and painting.
BRAKE PARMAC 15” DR Double Hydromatic
Brake Drawworks Mounted
ENGINES (2) CAT 3406 Diesel Engines, (1)
w/ Air Starter & (1) Electric Motor Starter, Each w/ NATIONAL C-195-64-FH
Torque Converter, Air Clutches, Each Skidded & 300 HP
MAST Lee C. Moore, 127’H x 15’W
Cantilever Mast 340,000 SHL, Pin-Type, 4-Sheave Crown (Includes Fastline),
11/8” Line, Crown Safety Platform, Racking Board, Pipe Boom, Tong
Counterweights, Derrick Climber, Ladder, Deadline Anchor, 4” Standpipe,
Standpipe Manifold 2/4” & 2” Gate Valves, Type D 3000# Pressure Gauge &
Mast Stand
SUBSTRUCTURE 10’H x 18’6”W x 40’L Box-on-Box
Substructure 400,000# SHL, w/ V-Door, Stairs, Safety Rails, w/ Drop in Floor
Plates
PUMPS
National K500A Duplex Mud Pump; 500-HP,
71/4” x 15”, Forged Steel Fluid End w/ Quick- Change Valve &
Cylinder Head Caps, CONTINENTAL-EMSCO Pulsation Dampener, OTECO 2” Shear Relief
Valve, Drive Assembly, Master Skidded, Powered By CAT 3412 Diesel Engine w/ Air
Starter, Air Clutch & Skidded.
IDECO MM-600 Duplex Mud Pump;, 600-HP,
MATCO Forged Steel Fluid End w/ Quick-Change Valve & Cylinder Head Caps,
HYDRIL K-20 3000# Pulsation Dampener, OTECO 2” Shear Relief Valve, Type D 3000#
Pressure Gauge, Drive Assembly, Master Skid, p/b CAT 379 Diesel Engine w/ Air
Starter, Air Clutch, Skidded Belt Drive Package;
ROTATING
EQUIPMENT IDECO 175-F Rotary Table, 171/2” x 44”, w/ Split Master
Bushing, 185-Ton Rotary Swivel, 41/4” x 41’L Square Kelly w/
BAASH-ROSS Kelly Drive Bushing, Square Drive in Rat Hole Sock.
34”H x 8’W x 36’L Pipe Tub w/ 40”W Steel
Deck Catwalk w/ 10’ Extension & Steps
(4) 30”H x 7’W x 40’L Pipe Tubs, (1) w/
(2) top-Mounted Removable Pipe Racks
Electric / Hydraulic Wireline Measuring
Device
Rathole &
Mousehole
Fluorescent & Mercury-Vapor Rig
Lights w/ Wiring
Drill Line Spool &
Stand
PIPE RACKS
2 Sets (4) 42”H x 28’L Triangular Pipe
Racks
(no drill string with
rig)
Extensive work done to make rig work
ready, including new wiring and lighting, new plumbing (air, fuel, water,
hydraulic), all structural repairs to the main components and repairing or
replacing ladders, steps, handrails, and sheet metal, repairing, rebuilding and
servicing all power units, pumps and drawworks as necessary, doing all cosmetic
repairs including sandblasting, cleaning and painting.
United U34 drawworks
(275 hp) Lebus grooved, makeup and breakout catheads, air driller’s console
controls, unit single engine compound drive, National C250 (newly rebuilt)
duplex mud pump, fuel tan, mud tank
