Drainage Pumps LAP

Application

• Waste water.Sump drainage.
• Flood control.
• Dewatering for fish pond or basement.

  Performance Range

• Head range up to 20 meters.
• Flow range up to 900 l/min. (54 m³/h).

  Features

• New design for light weight, elegant shape with best quality.
• Unfastening the bolts between the oil casing and the upper
  pump casing allows the body to be separated for easy maintenance.
• The smallest pump in the range is the LAP 2015 / 2035, which is an
  extremely practical pump, has a low temperature oil filled motor
  and single seal design.
• Pump for 2HP or higher are furnished with dual Mechanical seal.
  Silicon carbide at the water end and carbon ceramic at     
  the motor end.

  Thermal overload protector

• Equipped with Automatic reset motor protector, prevents motor from
  burning due to high temperature/phase failure/ voltage
  drop and lock impeller.
  

  Cable base

• Epoxy resin seal cable base to prevent water intrusion into motor
  through the cable wire.
  

  U Type Impeller

• This impeller can generate rapid rotating vortex to handle fluid
  mixed with long fiber, the majority of abrasive solids do     
  not touch impeller to minimize impeller wear.
  

  Float Switch

• SExcellent quality float switch Provided with epoxy resin sealed
  connector.
  

  Float Switch Pump

• The pumps are equipped with wide angle on/off level control
  float switch for easy and simple automatic operation.
• Applications : Slushy water, construction site, Dewatering,
  Drainage application.
• Type : ½ ~ 1 HP Single-phase pumps.
  

  Motor

• 2 - pole submersible motor 50Hz (n = 2900 RPM).
• Single phase :230V +5 - 15 %
• Three phase :400V +5 -15 %
• Protection IP 68
• Insulation class : B

  Operating Conditions

• Liquid temperature up to 40°.
• Ambient temperature up to 50°.
• Max.Starts per hour : 30 at regular intervals.
• Continuous duty.

  Special Features on Request

• Other voltages.
• Available in 60Hz.