Lubi pumps group of Industries (80mm) Submersible H3 Motor, (80mm) Submersible H3 Motor Manufacturers, (80mm) Submersible H3 Motor Exporters, (80mm) Submersible H3 Motor Suppliers
dthrotarydrilling
Select Your Language :
   

3"(80mm) Submersible H3 Motor


Quality for your borewell :

H3 Motors are suitable for 3” borewell, and operate with permanent split capacitor. H3 Motors are the choice for dependable, maintenance-free operation, and provides a long life for your submersible pump operation.

Product features :

  • Stainless steel outer shell and shaft.
  • Maintenance free lubricated ball bearings.
  • Rotation: Counter clock wise.
  • Vertical & horizontal mounting position.
  • High efficiency electrical design.(lower operating cost, Lower winding temperature).
  • Cooling & lubrication by non toxic fluid.
  • Motor for permanent split capacitor.
  • Pressure compensation diaphragm.
  • Continuous duty.

    Specifications :

  • Degree of protection : IP 68.
  • Insulation class : F.
  • Ambient temp. : 45°C.
  • Minimum Cooling flow along the motor : 8cm/sec.
  • Water pH : 6.5 - 8.0.
  • Maximum no. Starts per hour : 30.
  • Maximum submerged depth : 350 mts.
  • Ratings : Single phase 0.37 KW - 0.75KW.
  • Voltages : Single phase 230V +5%, -15% - 50Hz.
  • Thrust load : 1000 N.
  • Standard motor cable : Suitable for operation in drinking water. 1 X 1.5mm² X 3mts.
  • Motor protection : Select thermal overload protection with trip time < 10 sec. at 5xIn.
  • Special voltages, execution and material versions available on customer's request.


BACK