KGR Industries
Kgr IndustriesKgr IndustriesKgr Industries

Hammers


Hammers

KGR Hammers are manufactured with high quality by maintaining international standards . The best quality alloy steel pass through the radio graphic and ultrasonic tests. Then the products are heat treated in the most advanced method inside the factory. the carbide bits which are used are from branded manufacturers across the world.

  • Higher rate of penetration
  • Reduced maintenance cost
  • Reduced number of parts and compact structure for wear and tear
  • Higher product life
  • The capacity and capability to perform at higher pressure range (80-350 PSI)
Product Specifications & Particulars
KGR DIAMOND 30 drilling 3 1/2" to 4" in hard rock and 5" to 6" in over burden drilling.
KGR DIAMOND 40 drilling 4.1/8" to 5" in hard rock and 6" to 7" in over burden drilling.
KGR DIAMOND 60/65 drilling 6" to 6.1/2" in hard rock and 8" to 9" in over burden drilling.
KGR DIAMOND 80 drilling 8" to 8.1/2" in hard rock and 10" to 12" in over burden drilling.
KGR DIAMOND 100 drilling 10" to 10.1/2" in hard rock and 12" to 14" in over burden drilling.
KGR DIAMOND 120 drilling 12" to 12.1/2" in hard rock and 13" to 17.1/2" in over burden drilling.

* Note - And we manufacture as per the customer specification

Send mail
 
dthrotarydrilling.com 
 
Home | About us | Subscribe | Advertise in Magazine | Board | Technical Papers | Interview | E-Paper | Editor's Desk | Media Kit | Directory | Contact Us | Site Map
Terms & Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved.