Euro India Hose System
 
 
range of products
  • HYDRAULIC HOSE
  • HIGH PRESSURE JACK HOSE
  • SUPER HIGH PRESSURE HOSE
  • SEWER CLEANING HOSE
  • PAINT SPRAY HOSE (WIRE BRAIDED)
  • PAINT SPRAY HOSE (TEXTILE BRAIDED)
  • SPRAY HOSE
  • COMPRESSED AIR / MULTI PURPOSE
  • JACK HAMMER / ROCK DRILL HOSE
  • FIRE REEL HOSE
  • PTFE FLEXIBLE HOSES
  • LOW PRESSURE HOSES FOR AIR BRAKE - AB SERIES
  • PNEUMATIC TOOL HOSE
  • ULTRA HIGH PRESSURE WATER BLAST
  • LPG BUTANE & PROPANE
  • WELDIG HOSE
  • CNG FLAME RESISTANT ELECTRICALLY CONDUCTIVE HOSE
  • CEMENT GROUTING HOSE
  • HEAVY DUTY WATER HOSE
  • ORF – 6000 – AIR REFILLING HOSE
  •  

    LPG HOSE IS 9573- TYPE 4 - ISI MARK CM/6543371*

    Application Design for Domestic & commercial LPG installations as a safety item.
    Construction:
    Core Black low permeation synthetic rubber tube resistant to LPG.
    Reinforcement Single Layer of high tensile steel wire
    Outer Cover Orange pinpricked outer cover Fire Ozone & Abrasion Resistant SyntheticRubber                                    
    Temperature Range -40°C to 70°C
    CAUTION NO LEAKE SHOULD BE TOLERATE BECAUSE LPG IS HEAVIER THAN AIR IT MAY FALL THROUGH GROUND AND CAUSE OF FIRE

     

    Description Dash Size DN Hose I.D(Nom.) Hose O.D
    (Nom.)
    Working
    Pressure
    Min. Burst
    Pressure
    Min. Bend
    Radius
    (IN) (MM) (IN) (MM) (psi) (Bar) (psi) (Bar) (mm) (IN)
    LPG1 -05 05 08 5/16” 7.9 0.60 15.3 145 10 725 50 95 3.75
    LPG1 -06 06 10 3/8” 9.5 0.66 16.9 145 10 725 50 120 4.70
    LPG1 -08 08 12 ½” 12.7 0.787 20.0 145 10 725 50 150 6.00

    * LPG1-05  IS ONLY WITH ISI MARK CM/65433/71

    LPG HOSE   IS 9573- TYPE – 2  

     

    Application Design for Butane-Propane application on either mobile stationary equipment.
    Construction:
    Core Black low permeation synthetic rubber tube resistant to LPG.
    Reinforcement Single Layer of high tensile yarn.
    Outer Cover Black pinpricked outer cover Ozone & Abrasion Resistant Synthetic Rubber.
    Temperature Range -40°C to 80°C
    CAUTION NO LEAKE SHOULD BE TOLERATE BECAUSE LPG IS HEAVIER THAN AIR IT MAY FALL THROUGH GROUND AND CAUSE OF FIRE

     

    Description Dash  Size DN Hose I.D (Nom.) Hose  O.D
       (Nom.)
    Working
    Pressure
    Min. Burst
    Pressure
    Min. Bend
      Radius

    (IN)

    (MM)

    (IN)

    (MM)

    (psi)

    (Bar)

    (psi)

    (Bar)

    (mm)

    (IN)

    LPG2 -06 06 10 3/8” 9.5 0.66 16.9 363 25 1450 100 95 3.75
    LPG2 -08 08 12 ½” 12.7 0.819 20.8 363 25 1450 100 120 4.70
    LPG2 -10 10 16 5/8”  15.9 0.925 23.5 363 25 1450 100 150 6.00
    LPG2 -12 12 19 ¾” 19.1 1.043 26.5 363 25 1450 100 150 6.00

     

    LPG HOSE   BS 4089: 1989- TYPE – 1/ BS EN 1762 Type D


     

    Application

    Design for Transfer LPG in liquid or vapor form which is un vented between operations
    (permanently filled with liquid or vapor including automotive)

    Construction:             

    Core                         

    Black smooth low permeation synthetic rubber tube resistant to LPG.

    Reinforcement      

    Single Layer of high tensile steel wire.

    Outer Cover             

    Black pinpricked outer cover Weather, Fire Ozone & Abrasion Resistant Synthetic Rubber.

    Temperature Range 

    -20°C to + 45°C

    CAUTION          

    NO LEAKE SHOULD BE TOLERATE BECAUSE LPG IS HEAVIER THAN AIR IT MAY FALL THROUGH GROUND AND CAUSE OF FIRE

     

    Description

    Dash  Size

    DN

    Hose I.D 
    (Nom.)

    Hose  O.D (Nom.)

    Working
    Pressure

    Min. Burst
    Pressure

    Min. Bend
      Radius

    (IN)

    (MM)

    (IN)

    (MM)

    (psi)

    (Bar)

    (psi)

    (Bar)

    (mm)

    (IN)

    LPG2 -06

    06

    10

    3/8”

    9.5

    0.771

    19.6

    363

    25

    1450

    100

    120

    4.70

    LPG2 -08

    08

    12

    ½”

    12.7

    0.897

    22.8

    363

    25

    1450

    100

    150

    5.90

    LPG2 -10

    10

    16

    5/8” 

    15.9

    1.023

    26.0

    363

    25

    1450

    100

    185

    7.08

    LPG2 -12

    12

    19

    ¾”

    19.1

    1.185

    30.1

    363

    25

    1450

    100

    225

    8.86

    LPG2 -16

    16

    25

    1 ”

    25.4

    1.492

    37.9

    363

    25

    1450

    100

    300

    11.80

    LPG2 -20

    20

    32

    1.1/4”  

    31.8

    1.811

    46.0

    363

    25

    1450

    100

    380

    14.95

    LPG2 -24

    24

    38

    1.1/2”  

    38.1

    2.062

    52.4

    363

    25

    1450

    100

    450

    17.70

    LPG2 -32

    32

    51

    2”

    50.8

    2.625

    66.7

    363

    25

    1450

    100

    600

    23.60


    SINGLE STAINLESS STEEL BRAID LPG HOSE CGA  TYPE – III ( CANADIAN GAS ASSOCIATON )

     

    Application Design for LPG (Propane) vehicle alternative fuel conversion system.
    Construction:
    Core PA tube resistant to LPG.
    Reinforcement Single Layer of high tensile Stainless Steel wire.
    Outer Cover Black pinpricked outer cover Ozone & Abrasion Resistant Synthetic Rubber.
    Temperature Range -40°C to 121°C
    CAUTION NO LEAKE SHOULD BE TOLERATE BECAUSE LPG IS HEAVIER THAN AIR IT MAY FALL THROUGH GROUND AND CAUSE OF FIRE

    Application Design for LPG (Propane) vehicle alternative fuel conversion system.
    Construction:
    Core PA tube resistant to LPG.
    Reinforcement Single Layer of high tensile Stainless Steel wire.
    Outer Cover Black pinpricked outer cover Ozone & Abrasion Resistant Synthetic Rubber.
    Temperature Range -40°C to 121°C
    CAUTION NO LEAKE SHOULD BE TOLERATE BECAUSE LPG IS HEAVIER THAN AIR IT MAY FALL THROUGH GROUND AND CAUSE OF FIRE

    Description

    Dash  Size

    DN

    Hose I.D (Nom.)

    Hose  O.D
       (Nom.)

    Working
    Pressure

    Min. Burst
    Pressure

    Min. Bend
      Radius

    (IN)

    (MM)

    (IN)

    (MM)

    (psi)

    (Bar)

    (psi)

    (Bar)

    (mm)

    (IN)

    LPG2 -06

    06

    10

    3/8”

    9.5

    0.66

    16.9

    363

    25

    1450

    100

    95

    3.75

    LPG2 -08

    08

    12

    ½”

    12.7

    0.819

    20.8

    363

    25

    1450

    100

    120

    4.70

    LPG2 -10

    10

    16

    5/8” 

    15.9

    0.925

    23.5

    363

    25

    1450

    100

    150

    6.00

    LPG2 -12

    12

    19

    ¾”

    19.1

    1.043

    26.5

    363

    25

    1450

    100

    150

    6.00

    Send mail
     
    dthrotarydrilling.com
     
     

    Euro India - LPG HOSE IS 9573- TYPE 4 - ISI MARK CM/6543371

     
    Home | About us | Subscribe | Advertise in Magazine | Board | Technical Papers | Interview | E-Paper | Editor's Desk | Media Kit | Directory | Contact Us | Site Map
    Terms & Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved.