Euro India Hose System
 
 
range of products
  • HYDRAULIC HOSE
  • HIGH PRESSURE JACK HOSE
  • SUPER HIGH PRESSURE HOSE
  • SEWER CLEANING HOSE
  • PAINT SPRAY HOSE (WIRE BRAIDED)
  • PAINT SPRAY HOSE (TEXTILE BRAIDED)
  • SPRAY HOSE
  • COMPRESSED AIR / MULTI PURPOSE
  • JACK HAMMER / ROCK DRILL HOSE
  • FIRE REEL HOSE
  • PTFE FLEXIBLE HOSES
  • LOW PRESSURE HOSES FOR AIR BRAKE - AB SERIES
  • PNEUMATIC TOOL HOSE
  • ULTRA HIGH PRESSURE WATER BLAST
  • LPG BUTANE & PROPANE
  • WELDIG HOSE
  • CNG FLAME RESISTANT ELECTRICALLY CONDUCTIVE HOSE
  • CEMENT GROUTING HOSE
  • HEAVY DUTY WATER HOSE
  • ORF – 6000 – AIR REFILLING HOSE
  •  

    CGL – CEMENT GROUTING HOSE

    Applicable Standard: ISS 5137 / 1990
    Application:

    Design for wide range of application for cement grouting at irrigation projects,building sites and construction of roads in hilly areas, for conveying dry and wet concrete mixtures and cement.  


    Construction:
     
    Core : abrasion resistant soft synthetic/natural rubber with increased flex life.
    Reinforcement: High Tensile synthetic fiber/impregnated with rubber in suitable number of plies
    Electrical Discharge : Suitable copper wire between reinforcement plies to provide electrical continuity
    Outer Cover : Hard working Synthetic elastomer / Rubber Abrasion and Ozone resistant
    Armour : Out side armoring of wire provide if needed.
    Temperature Range: -40°C to 82°C
    Color : Black


    Technical Details

    Description
    Dash Size
    DN
    Hose I.D.
    (Nom.)
    Hose O.D.
    (Nom.)
    Working
    Pressure
    Min.Burst
    Pressure
     
     
     
    (In.)
    (mm)
    (In.)
    (mm)
    (psi)
    (Bar)
    (psi)
    (Bar)
    CGL-16
    16
    25
    1”
    25.4 1.785 45.0 145 10 580 40
    CGL-20
    20
    32
    1.1/4”
    31.8 2.063 52.0 145 10 580 40
    CGL-24
    24
    38"
    1.1/2"
    38.1 2.380 60.0 145 10 580 40
    CGL-32
    32
    51
    2”
    50.8 2.896 73.0 145 10 580 40
    CGL-40
    40
    64
    2.1/2”
    63.3 3.412 86.0 145 10 580 40
    CGL-48
    48
    76
    3”
    76.2 3.928 99.0 145 10 580 40
    CGL-60 60 100 4” 101.6 5.000 126.0 145 10 580 40

    # MAX LENGTH 25 MTR
    OTHER SIZE :57 MM, 64 MM, 70 MM, 89 MM, 115 MM, 125 MM, 150 MM,165 MM, 200 MM, 250 MM, 300 MM & DEVELOP UP TO 750 MM NOMINAL BORE. PLEASE CONTECT EURO(INDIA) HOSE SYSTRM FOR MORE DETAILS NOTE: HOSE OD MAY CHANGE DUE TO SELECTION OF REINFORCEMENT TECHNIQUE / PRODUCT.

     CPH – CONCRETE PLACEMENT HOSE :

     

    Applicable Standard: DIN 53516:50 ± 5 mm3 abrasion loss of tube.
    Application:

    Steel cord design use for placement of concrete at casting location, It is used at The end of the pump to distribute the concrete. The hose resist to  suction during the cleaning process

     


    Construction:
    Core : Highly abrasive action esistant NR/SBR black smooth bore tube.
    Reinforcement: Plies of High Tensile steel wire cord.
    Outer Cover: Hard working NR/SBR -RF Abrasion and Ozone resistant.
    Temperature Range: -40°C to 82°C
    Color : Black
    End Connection/Fitting : Supply with Swaged on FULL FLOW hardened coupling

     

    Technical Details

    Description
    Dash Size
    DN
    Hose I.D.
    (Nom.)
    Working
    Pressure
    Min.Burst
    Pressure
    Weight Nominal
    Bending Radius Vacuum
     
     
     
    (In.)
    (mm)
    (In.)
    (mm)
    (psi)
    (Bar)
    KG/M
    mm
    inch Bar
    CPH-70
    5”
    125
    6.071
    153 1200 80 3000 200 9.67 700 28 0.8
    Send mail
     
    dthrotarydrilling.com
     
     
    Home | About us | Subscribe | Advertise in Magazine | Board | Technical Papers | Interview | E-Paper | Editor's Desk | Media Kit | Directory | Contact Us | Site Map
    Terms & Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved.