| Model |
|
| GP - 500H |
Drill
supplied with Air Compressor is suitable for DTH drilling only. |
| GP - 500H MR |
Drill
supplied with Mud Pump is Suitable for direct rotary drilling only. |
| GP - 500H C |
Drill
supplied with Air Compressor and Mud Pump is combination drill Suitable
for DTH and
Mud Rotary drilling. |
| Rated Capacity |
150mm / 165 mm Dia. hole Up
to 160 Mts. Depth by using 4 1/2" OD Drill Pipe & DTH Tools. |
| w |
150mm / 165 mm Dia. hole Up
to 160 Mts. Depth by using 4 1/2" OD Drill Pipe & R. R. Bit
by Mud Circulation Method. |
| Mast |
Structural Steel, Electrically
welded, suitable for handling drill pipes and casing pipes load |
| Standard |
Suitable
for 4.5 Mts. long drill pipes. |
| Optional |
Suitable
for 3 Mts. OR 6 Mts. long drill pipes. |
| Pull Down/Hoisting |
Through Hydraulic Cylinder and
Chain / Wire Rope Combination. |
| Hoisting Capacity |
8000
Kgs. |
| Pull Down Force |
6000
Kgs. |
| Rotation |
Top Drive Head through Hydraulic
Motor/s |
| Speed Standard |
0
- 60 RPM Infinitive Variable speed and Constant Torque 200 Kg-mts. |
| Speed Optional |
0
- 100 RPM Infinitive Variable speed and Constant Torque 300 Kg-mts. |
| w |
0
- 150 RPM Infinitive Variable speed and Constant Torque 200 Kg-mts. |
| Air Compressor |
Diesel
engine driven, One / Two stage, rotary screw compressor |
| w |
15.5
- 17.6 m3/min. at 10.55 Kg/cm2 |
| w |
14.2
- 25.5 m3/min. at 14.06 Kg/cm2 |
| Mud Pump |
|
| Model |
CBG
- 150 |
| Type |
Duplex,
Double Acting, Reciprocating Pump. |
| Stroke & Liner Size |
150
mm X 125 mm |
| Disp. & Pressure |
698
LPM @ 22.58 Kg/cm2 |
| Hydraulic System |
Two
Circuits, 2 Hydraulic Pump delivering around 200 LPM Oil at 175
Kg/cm2 Pressure.
Along with Oil tank, Filter, Strainer,
Air Breather, Control Valve, Rubber Hose, Pipe line. |
| Leveling Jack |
4
Hydraulic Jack, 100 mm ID X 600 mm Stroke. |
| Water Injection Pump |
Through
Triplex Reciprocating Pump. |
| Air Line Lubricator |
13.5
Liters capacity Air line lubricator. |
| Prime
Mover |
Hydraulic
System and Mud Pump shall be driven by Truck engine through PTO.
Compresso
Shall be driven by It's Own Engine. |
| Mounting |
Entire
Drill including Air Compressor and Mud Pump shall be mounted on
Single truck. |
| w |
OR |
| w |
Drill
Module and Mud Pump shall be mounted on one truck and Air Compressor
shall be
mounted on another Truck. |
| Optional |
Hole
back system, Semi automatic feed & pressure control system,
Hydraulic Break
Out System, Hydraulic Winch, Rod Changer,
Lighting & Welding Generator, etc. |
