| Model |
|
| GP - 1000H |
Drill supplied with Air Compressor
is suitable for DTH drilling only. |
| GP - 1000H MR |
Drill supplied with Mud Pump
is Suitable for direct rotary drilling only. |
| GP - 1000H C |
Drill supplied with Air
Compressor and Mud Pump is combination drill Suitable for
DTH
and Mud Rotary drilling. |
| Rated Capacity |
150mm / 165 mm Dia. hole Up to
305 Mts. Depth by using 4 1/2" OD Drill Pipe & DTH
Tools. |
| w |
150mm / 165 mm Dia. hole Up to
305 Mts. Depth by using 4 1/2" OD Drill Pipe & R. R.
Bit
by Mud Circulation Method |
| Mast |
Structural Steel, Electrically
welded, suitable for handling drill pipes and casing pipes
load |
| Standard |
Suitable for 6 Mts. long drill
pipes. |
| Pull Down/Hoisting |
Through Hydraulic Cylinder and
Chain / Wire Rope Combination. |
| Hoisting Capacity |
10700 Kgs. |
| Pull Down Force |
7200 Kgs. |
| Rotation |
Top Drive Head through
Hydraulic Motor/s |
| Speed Standard |
0 - 60 RPM Infinitive Variable
speed and Constant Torque 200 Kg-mts. |
| Speed Optional |
0 - 100 RPM Infinitive
Variable speed and Constant Torque 300 Kg-mts. |
| q |
0 - 150 RPM Infinitive
Variable speed and Constant Torque 200 Kg-mts. |
| Air Compressor |
Diesel engine driven, One /
Two stage, rotary screw compressor. |
| w |
15.5 - 17.6 m3/min. at 10.55
Kg/cm2 |
| w |
14.2 - 25.5 m3/min. at 14.06
Kg/cm2 |
| Mud Pump |
|
| Model |
CBG - 150 |
| Type |
Duplex, Double Acting,
Reciprocating Pump. |
| Stroke & Liner Size |
150 mm X 125
mm |
| Disp. & Pressure |
698 LPM @ 22.58
Kg/cm2 |
| Hydraulic System |
Two Circuits, 2 Hydraulic Pump
delivering around 200 LPM Oil at 175 Kg/cm2
Pressure.
Along with Oil tank,
Filter, Strainer, Air Breather, Control Valve, Rubber Hose, Pipe
line. |
| Leveling Jack |
4 Hydraulic Jack, 125 mm ID X
600 mm Stroke. |
| Water Injection Pump |
Through Triplex Reciprocating
Pump. |
| Air Line Lubricator |
13.5 Liters capacity Air line
lubricator. |
| Prime
Mover |
Hydraulic System and Mud Pump
shall be driven by Truck engine through
PTO.
Compressor Shall be driven by
It's Own Engine. |
| Mounting |
Entire Drill including Air
Compressor and Mud Pump shall be mounted on Single
truck. |
| w |
OR |
| w |
Drill Module and Mud Pump
shall be mounted on one truck and Air Compressor shall be
mounted
on another
Truck. |
| Optional |
Hole back system, Semi
automatic feed & pressure control system, Hydraulic Break Out
System,
Hydraulic Winch, Rod Changer,
Lighting & Welding Generator,
etc. |
