Mount Drilling & Water Treatment
Mount Drilling & Water TreatmentMount Drilling & Water Treatment

Drilling

line

Things you should know about drilling for water:

  1. Check out water availability in an area before you purchase property by contacting us at 740-323-0228 or get information from the Ohio Department of Natural Resource's Division of Water website at www.dnr.state.oh.us and click on Division of Water links.
  2. Wells in Licking and surrounding counties vary in depth from 25' to 550'.  An average depth is between 125-150'.  An average cost of a residential well (5") with a 12 gpm submersible pump system is approximately $4,000.00, depending on the depth and the type of casing used, etc.
  3. Wells in central Ohio come from either rock formations (sandstone, shale, limestone, etc.) or sand and gravel formations.  Mount Water Well Drilling uses mostly rotary type drilling for rock formations.  In these instances, plastic casing is generally used.  Annular space is grouted with betonite.  For sand and gravel formations, a cable (or percussion) rig is normally used along with steel casing.  Many times, a stainless steel well screen is used to develop these formations.
     

    Stainless steel well screens are more expensive than perforations, however,they more than pay for themselves in the long run.

    • Stainless Steel screens almost never have to be cleaned.  One cleanoutwell drilling on a perforated well pays for a stainless screen.
    • Screens can develop formations that perforations cannot.
    • Screens are far more effective at keeping unwanted sand out.
    • Screens provide much more water than perforations.

     

     

    well drilling

    well drilling

  4. Steps to getting a well drilled for a residential property:

     

    • Call us for a free estimate and information on the wells in the area you wish to drill.  We can send you a written estimate or meet you at the site and give you an estimate in person.
    • Obtain a permit from your county Health Department.  Before doing this, we highly recommend meeting an inspector from your local Health Department at your property to determine locations and feasibility of water well and septic in relation to your home location.
    • Meet with us at your site to determine location and mark it for drillers.  We will need a signed estimate and contract before drilling is commenced.


       
  5. Steps to getting a well drilling under EPA Jurisdiction.  (Any system that serves at least 25 people 60 days out of the year)
    • Call us for information on wells in your area.
    • An EPA inspector will need to meet at the site with the property owner and driller to determine the site location.  After that, a site approval letter will be issued by the EPA.  Once that letter is issued, drilling can commence.
    • Things to keep in mind when working with the EPA:
      1. Because of regulations, requirements, and plan drawings, these wells and water system are more expensive than a conventional system under your local Health Department's jurisdiction.
      2. These systems take longer to get installed because of the extra regulations required and drawings.
      3. Detailed plans (these can be done by Mount Water Well Drilling) have to be drawn and submitted before the system can be installed for new well approval.  Once submitted, the approval usually comes within 30 to 60 days.
      4. EPA requires a new well perimeters lab analysis to be done once the well is drilled and a 24-hour pump test and chlorination.  This lab analysis can cost between $1,200.00 - $1,500.00.
Send mail
 
Services
grade
dthrotarydrilling.com 
 
Home | About us | Subscribe | Advertise in Magazine | Board | Technical Papers | Interview | E-Paper | Editor's Desk | Media Kit | Directory | Contact Us | Site Map

Terms & Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved.